''The Official Wheel Thread''

[Frenchie]

Let me start with these sexy wheels - check those black/yellow Ronals - HOT !!


http://farm5.static.flickr.com/4027/4421258794_9c2e68d4c5.jpg

http://farm5.static.flickr.com/4025/4421258340_6a5eaf9c77.jpg

http://farm5.static.flickr.com/4020/4420491713_8b91766125.jpg

http://farm5.static.flickr.com/4024/4420491875_7beca48546.jpg

http://farm5.static.flickr.com/4020/4421258088_e909d7b288.jpg

http://farm3.static.flickr.com/2718/4421258180_3170b0faa5.jpg

http://farm5.static.flickr.com/4024/4420491421_3251ed1a09.jpg

http://farm3.static.flickr.com/2682/4420491339_d86786c54f.jpg

http://farm3.static.flickr.com/2778/4420487935_6f547c0b24.jpg

http://farm5.static.flickr.com/4034/4420489909_4a67937e45.jpg

http://farm5.static.flickr.com/4046/4421256216_d4ca0c2bd5.jpg

http://farm5.static.flickr.com/4035/4420490499_2da8a6591f.jpg

[Justin Fox]

I'm a sucker for Ronals too.

My fave wheel of all time though is still the CE28N. It's one of the lightest forged rims that Rays make and it's just a timeless Japanese multi-spoke classic. Here are mine on the GT-R:

http://farm3.static.flickr.com/2491/3943702611_ea1a8b6ee1_o.jpg

[Justin Fox]

Here are a few more wheels I love:

http://farm5.static.flickr.com/4052/4277809643_237b05c6d4_o.jpg
Deeeeep flower, these should be out any month now.

http://farm4.static.flickr.com/3222/2988670976_8b9db78dae_o.jpg
Advan RS. Elegant and they look bigger than they are (I like that).

http://farm3.static.flickr.com/2040/2211883362_349943378b_b.jpg
JDM Amuse/Ericsson BMW with BBS LM-R's.

http://old.culturegarage.com/wp-content/uploads/2008/01/amuse2.jpg

http://i735.photobucket.com/albums/ww352/nemochocolate/amuse-nissan-370z-vestito-3.jpg

http://farm4.static.flickr.com/3426/3399679209_3a24e9b45f_b.jpg
Work Mesiters (or SSR Professors) when you need a deep dish chunky 5 spoke for street cred.

[Pharkus]

Leaning towards the Advan RS at the moment, trying to find the time and a place where they have both them and the RS-D's to look at in person. Mentioned in the tyre thread I need new tyres so may just bite the bullet and do them both at the same time. I've read mixed reviews on the quality of OZ wheels, but I like the look of the Alleggerita HLT in Matt Graphitt Silver or Titamium Tech. http://www.ozracing.com/at-team/wheels/racing/alleggerita-hlt/en

[nath_mk6]

I'm actually quite partial to the Advan F7s simple lines and all that, but a little bit pricey for my budget sadly :(

http://www.yokohama.com.au/media/car_AVS_F7_R35GTR.7399.png

[∆pex]

Love those WedsSport SA-60M's, look similar to my Advan Model T5's...

http://farm3.static.flickr.com/2595/4168374047_2b4204eda7_o.jpg (http://farm3.static.flickr.com/2595/4168374047_2b4204eda7_o.jpg)

[Pharkus]

BBS CH-R

http://www.bbs.com/_images/company/ch-r_silver.jpg

http://www.bbs.com/_images/company/ch-r_black.jpg

My piggy bank is shaking with fear.

[Paolo]

yeah love the CH-Rs but i recall Frenchie saying something like they only came in 20inch and prices were a real ball breaker

EDIT: just found out theyre doing 19inch! very tempting but VERY expensive as well

[Pharkus]

yeah love the CH-Rs but i recall Frenchie saying something like they only came in 20inch and prices were a real ball breaker

EDIT: just found out theyre doing 19inch! very tempting but VERY expensive as well

If you have a GTI I think it's not so bad for tyres. The rating required for the R32 is a real deal breaker on 19's.

[Frenchie]

yeah love the CH-Rs but i recall Frenchie saying something like they only came in 20inch and prices were a real ball breaker

EDIT: just found out theyre doing 19inch! very tempting but VERY expensive as well

19'' should be out now - just not 6months ago.

Price should be ok in comparison to BBS CH

Come on Pharkus time to get Spartacus !!

[Jig]

This is arriving in the next 2-3 weeks for my R32. 18" Single Piece Fully Forged Race Prepared wheel weighing 7.5Kg per corner

http://www.adv1wheels.com/gallery/main/wheelshots/data/images/3882116435_843f4edba3_b.jpg

[stevie]

Very nice, what rubber are you going to wrap them with?

[nath_mk6]

Nice wheels there Jig :)

[Pharkus]

19'' should be out now - just not 6months ago.

Price should be ok in comparison to BBS CH

Come on Pharkus time to get Spartacus !!

I've just seen Jig's wheels and have been left speechless. Most people would get turned on by the look of the wheel, how classic it is, colour, how light hey are, how big etc. I'm blown away by just how easy those look to clean!!!

As mentioned before, I am very close to a $1,000 gift voucher from AMEX so could possibly fund a large portion of my wheels via this.

[Frenchie]

Ha finally Jig - looking very sharp !! Can't complain about the wheel weight. LIGHT !
So I gather they are yours, yes ? I do recall Thomas saying they were going to post pics of finish product.

Can't wait to touch them :)

[Pharkus]

OK. Anyone know of a design similar to Jig's that are around the $2k mark but still good quality. Looking for 18 x 8.

[Jig]

Very nice, what rubber are you going to wrap them with?

Thanks Steve. I will have to look and see what state my OEM Dunlop Sport Maxx is at. I dont do a whole lot of kms driving and I have only clocked 16K kms. If there is enough thread left, I will just swap them over to the new wheels. If not, I have 3 tyre choices below in order of preference.

1. Michelin Pilot Sport 3
2. Continental CS3
3. Yokohoma Advan Sport

[Jig]

I've just seen Jig's wheels and have been left speechless. Most people would get turned on by the look of the wheel, how classic it is, colour, how light hey are, how big etc. I'm blown away by just how easy those look to clean!!!

As mentioned before, I am very close to a $1,000 gift voucher from AMEX so could possibly fund a large portion of my wheels via this.

You can Pharkus. After my Work VS-XX, the classic style of this wheel is perfect. EAsier to clean and makes the wheel look bigger. I also chose this classic 5 spoke Wheel because my brakes will be replaced by Brembo's 6pot BBK which will show up nicely. You are reducing unsprung weight on the car by 22Kgs. That is significant and can easily equate to better performance. Same with the BBK. It will reduce 10Kgs off compared to the OEM calipers and discs. So in total 30Kgs of weight saving.

[Jig]

Ha finally Jig - looking very sharp !! Can't complain about the wheel weight. LIGHT !
So I gather they are yours, yes ? I do recall Thomas saying they were going to post pics of finish product.

Can't wait to touch them :)

Hi Frenchie: That is what the wheels is going to look from a design standpoint. The finish of the wheel is Satin Matt Black however and I am not sure if that pic is that finish. I will PM you once it arrives so that we can both gawk at it at Ramspeed.

[Jig]

Nice wheels there Jig :)

Thanks Nath.

[Frenchie]

Hi Frenchie: That is what the wheels is going to look from a design standpoint. The finish of the wheel is Satin Matt Black however and I am not sure if that pic is that finish. I will PM you once it arrives so that we can both gawk at it at Ramspeed.


Done - I'll bring a bib :) as I will most likely be dribbling !

[Justin Fox]

This is arriving in the next 2-3 weeks for my R32. 18" Single Piece Fully Forged Race Prepared wheel weighing 7.5Kg per corner

http://www.adv1wheels.com/gallery/main/wheelshots/data/images/3882116435_843f4edba3_b.jpg

Very nice Jig, 7.5kg/wheel is damn light! Definitely at the peaky end of the wheel weights chart. I assume 18x8? +50 or did you go for something more aggressive?

[elisiX]

Frenchie your wheels are the BBS CH-R right? And in 20"?

I'm interested in those wheels but 19" - just dont know if they will go with the CSG on the GTI.

If I switch to the R I am 99% sure those are the wheels I will go with.

If I stick with the GTI, itll most likely be the VMR 710's.

http://www.velocitymotoring.com/

http://c4.ac-images.myspacecdn.com/images01/99/l_d1b42910db2dfe376699d8328cd29cff.jpg
http://www.vwvortex.com/jamie/vwv-gti6-1.jpg
http://www.vwvortex.com/jamie/vwv-gti6-2.jpg

Very well priced and a nice copy of the HRE BMW wheel. I think they will suit the CSG well - but only in the hyper silver finish.

I love the silver lip on the BBS CH-R though. See how I go on the GTI/R front.

[Frenchie]

My wheels are 19'' BBS- CH Black edition and they too have a silver lip protection.

I don't think BBS CH-R come in 5x112 fitment yet only BMW fitment.

I do like the VMR in that finish.

[Capercat]

I'm liking this wheel thread.

[Jig]

Very nice Jig, 7.5kg/wheel is damn light! Definitely at the peaky end of the wheel weights chart. I assume 18x8? +50 or did you go for something more aggressive?

Hi Justin: I dont have the offset as yet. The forging specs is coming within the next week or so and once that has been applied onto the wheel, only then can they tell me what the offset is going to be. It will be an 18x8 wheel for sure but dont know what the ET is yet. Will post here once I have it.

[elisiX]

My wheels are 19'' BBS- CH Black edition and they too have a silver lip protection.

I don't think BBS CH-R come in 5x112 fitment yet only BMW fitment.

I do like the VMR in that finish.

I'm pretty sure you can select the BBS CH-R in 19" with VW GOLF fitment on Tirerack.com

[Frenchie]

Nope - Please tell me if I am wrong but like I said, they have just released 19'' BBS CH-R and they are not VW spec friendly.

Just went on Tirerack to see - but no luck.

In time BBS will release CH-R VW/Audi spec friendly.

[Paolo]

I'm pretty sure you can select the BBS CH-R in 19" with VW GOLF fitment on Tirerack.com

i emailed them and no fitment for the VWs yet only BMWs and Audis
also talked with Frenchie about this, so expensiveee and tires as well!
VMRs are on my possible list as well and might end up with them

[elisiX]

Cool - so the BBS CH-R 'LOOKING" wheel they have is the BBS CH 'Black Edition' like you have?

What's the difference?

I thought the wheels on tirerack looked exactly the same (silver lip, black finish etc).

[Frenchie]

i emailed them and no fitment for the VWs yet only BMWs and Audis


Are Audi fitment available ? Strange ?

As we share the same specs 5x112 - most of them

[Frenchie]

Cool - so the BBS CH-R 'LOOKING" wheel they have is the BBS CH 'Black Edition' like you have?

What's the difference?

I thought the wheels on tirerack looked exactly the same (silver lip, black finish etc).

Very similar -
best is to open 2 pages from Tirerack side by side and compare, you will find that CH-R are more ''open'' ''white writing'' and may have one spoke less ?

[Paolo]

Are Audi fitment available ? Strange ?

As we share the same specs 5x112 - most of them

from memory thats what redline replied to me with
but yeah does seem strange that theyd say that unless its my memory =S

[elisiX]

Very similar -
best is to open 2 pages from Tirerack side by side and compare, you will find that CH-R are more ''open'' ''white writing'' and may have one spoke less ?

Thanks - just did this and you are 100% right. I hadn't realized that the CH-R were so different.

They look more like the VMR 710's which I really like.

On Tirerack at least they're about the same price as the regular CH Black's like yours.

Would love to see how they go with CSG on a GTI. I have a feeling there isnt enough contrast.

I'd 100% be inclined to grab them if I switched to the R in another color (Blue/White).

[Pharkus]

The spokes on the CH-R are a lot sharper and more agressive than on the original CH wheels. VMR's are also on my list but am just doing a bit more research into the quality of these vs the Enkeis that 10D has.

I know 18x 8 fits flush with most wheels but this would depend on the offset. I'm really new to changing wheel sizes so don't like to muck around in this area. The other thing is that I would not like to go bigger than 8.5 width and to do a search to make sure that this is still within ADR guidelines for Victoria.

Someone has done these...

http://www.velocitymotoring.com/links/secured/resize.php?img=../images/VMR_Wheels_VW_R32_Red_V715_19_Hyper-Silver_304.jpg&maxDim=918x918

[elisiX]

The Enkei's will be the better wheel I imagine - but i've already done a bunch of research into the VMR 710's (speaking with distributors etc) - they're a good wheel.

There some info over on VWWC that I posted. iirc they are going to be sold locally and a set will run about $1200 (I may be wrong - cant recall). Add tyres and its a good deal.

Well vs the option of a $600 USD a corner BBS CH from tirerack. BBS cant be beat though really.

[Big Yellow]

John, 8.5" is fine as its only 1" wider than stock.

For reference the black wheels u saw on my car are 18x8 et42 and sit flush! 8.5" would be have a little poke but nothing outrages.

[Pharkus]

John, 8.5" is fine as its only 1" wider than stock.

For reference the black wheels u saw on my car are 18x8 et42 and sit flush! 8.5" would be have a little poke but nothing outrages.

Outrages!!!! Outrageous with the spell checker there Terrence. I don't want any poke at all, nor do I like the look of the stretched tyre. Spoken at length with Tendy this morning and got my sights set on 235's. I suppose that 8.5" could be doable with a suitable offset and camber adjustments? But this would affect ride, handling and tyre wear? Wheels will be cosmetic for the most part for me.

@ ElisiX - When you compare the additional you are paying for the Enkei's you could get the full package with VMR's. It's a tough call. I'll log over and have a read of your research on VWWC, the only time I log in there is to bag Terrence.

[Justin Fox]

You guys drive German cars. Volkswagen.

I can totally understand a university kid putting some fake rims on their 3rd hand Honda Civic because they can't afford the real thing, but putting fake rims on VW R32's and GTI's? You've all got your values in the wrong places!!!

[elisiX]

I tend to agree Justin but the VMR wheels are not your typical crap from the local Bob Jane.

Essentially, expensive wheels, cheaper wheels - most are made in the same or similar factories under similar conditions.

I'd have no issues with buying the VMR 710's. However if the CH Black or CH-R suit my GTI or R - I am inclined to go that way.

CH-R w/ PSS10 would be very special IMO.

[Pharkus]

You guys drive German cars. Volkswagen.

I can totally understand a university kid putting some fake rims on their 3rd hand Honda Civic because they can't afford the real thing, but putting fake rims on VW R32's and GTI's? You've all got your values in the wrong places!!!

I'm with you here Justin. But I didn't want to curb what people wanted to do to their own cars. My philosophy has always been you get what you pay for, unless you bargain hard and you get slightly more. Doing things properly the first time would be preferable. However, I think there are different circumstances for each person. Sure some may drive a GTI but they may have pushed the budget out that little bit further to get there. Whilst others may be able to just ask what's the best and get that without a second thought.

I haven't seen many here that have tried to argue that they are getting "fake" rims as opposed to spending the money on originals. It's a tough call, however the gap in "quality" of lesser branded wheels is not so bad that we hear people having problems with them.

It would be more helpful if VW as a brand recognised that certain enthusiasts know their stuff and have an appropriate option for us. Prime example is $800AUD for 1, yes ONE! OEM Omanyt rim. You could easily get an equivalent 18" BBS CH from tirerack for that. But then again, if every GTI/R32 came with BBS CH's would we all not want to upgrade to something even better?

[Jig]

I have 3 rules for buying wheels.

1. Stick with a reputable manufacturer

2. Nothing wrong with new manufacturers for as long as you have done your research, have spoken to the CEO of the company, have customer references and checked their credit history.

3. Get as light of a wheel as you can based on the processing type(ie. cast vs forged et al). However be careful that a super light wheel that is not forged maybe prone to harm on our roads. Very few wheel manufacturers offer super light weight wheels and claim they are as "strong" as a forged wheel.

Choosing a wheel is very subjective and you dont necessarily have to go balls out and get the most expensive. Most expensive is not necessarily the best but one rule rings true. The more exclusive wheel manufacturer you choose, the more you pay.

[Justin Fox]

Some good discussion in here. I might consider moving this content to a new thread outside of the Appearance section of the forum?

[Pharkus]

I can't recall who actually makes the OEM wheels. I agree with Jig in that a reputable manufacturer should be a factor in considering what wheels you will be purchasing. However, this raises the query as to how does one become a reputable manufacturer if you are new to the market. I guess you do this the old fashioned way by making quality product from the start and maintain a high standard on your product.

@Justin - Maybe rename this the wheel dicsussion thread and start another that just lists pics and specs?

[schoona]

Here are a few more wheels I love:

http://farm5.static.flickr.com/4052/4277809643_237b05c6d4_o.jpg
Deeeeep flower, these should be out any month now.

http://farm4.static.flickr.com/3222/2988670976_8b9db78dae_o.jpg
Advan RS. Elegant and they look bigger than they are (I like that).

http://farm3.static.flickr.com/2040/2211883362_349943378b_b.jpg
JDM Amuse/Ericsson BMW with BBS LM-R's.

http://old.culturegarage.com/wp-content/uploads/2008/01/amuse2.jpg

http://i735.photobucket.com/albums/ww352/nemochocolate/amuse-nissan-370z-vestito-3.jpg

http://farm4.static.flickr.com/3426/3399679209_3a24e9b45f_b.jpg
Work Mesiters (or SSR Professors) when you need a deep dish chunky 5 spoke for street cred.

I like this man :) lol.
Love the S2k

[schoona]

I can't recall who actually makes the OEM wheels. I agree with Jig in that a reputable manufacturer should be a factor in considering what wheels you will be purchasing. However, this raises the query as to how does one become a reputable manufacturer if you are new to the market. I guess you do this the old fashioned way by making quality product from the start and maintain a high standard on your product.

@Justin - Maybe rename this the wheel dicsussion thread and start another that just lists pics and specs?

OEM GTI MkV was a BBS cast wheel.
OEM R32 was a Ronal ( I think ?? )

Myabe this will gain some more exclusive/upper market love?

http://www.youtube.com/watch?v=Qq1YyzWS5bw

[Frenchie]

Good points there folks from both parties..

Your call Justin.

Onething is for sure I love wheels !!

Seen that youtube before - great insight on BBS !

[Big Yellow]

Oem omanynts are made in italy by speedline

[Paolo]

VMRs are from inferior from my research. ive seen alot of m3s and corvettes rocking them in America
PLUS Frenchie digs my choice =P

[Justin Fox]

I've seen ROTAS on R35 GT-R's too! Sure doesn't instantly make them a great wheel (it's more that I disrespect them copying other wheel designs).

[Pharkus]

So back onto the discussion, I personally would rather saving up for some "decent" wheels and doing it right the first time. Of course you need to then take into account how much longer it will take to save up for the right wheel and how long you are planning to keep the car for (no use upgrading in 4 months time if you want to sell in 5 months for example).

What would people consider a fair amount to spend on wheels but still get quality, in terms of looks, size, durability & weight?

My picks are limited to Enkei, BBS and Advan at the moment and size is limited to 18x 8.5 at the larger end of the scale.

[nath_mk6]

Something that i thought about for a while the cost v value for money issue I mean yes you can get great lightweight wheels like the adv 7 wheel but the cost is very high and I prrsonally couldn't see the vfm at that price. I went for an 18x8 ET 50 at around 10kg ea for mid $3000 delivered which to me was a good compromise between weight and cost.

Shame they won't be here now until next week sadly :(

[Jig]

That is a fair enough comment Nath. Good to see what your new wheels will look on your car.

Value for money is a very subjective matter. We can all argue that an R32 is better value for money than an S3 as most options on an S3 are added cost compared to them being standard on an R32. You can also argue that an R8 V10 is better value than a Gallardo considering its the same engine.

[Pharkus]

You have a set of Neuspeeds John? Most of the shots for your car show the Detroits which imho look sweet as and keeps the OEM look of the Golf intact.

[Justin Fox]

Definitey - it's all about taste unless you're after the lightest wheels possible for the best possible performance but even then you're most likely going to get a hot rim as the strongest forged lightweight wheels out on the market are very much respected and desired wheels.

So many people rock heavy 3 piece rims for the look (they're damn heavy but they're so hot!).

[Pharkus]

Definitey - it's all about taste unless you're after the lightest wheels possible for the best possible performance but even then you're most likely going to get a hot rim as the strongest forged lightweight wheels out on the market are very much respected and desired wheels.

So many people rock heavy 3 piece rims for the look (they're damn heavy but they're so hot!).

Taking that into account then and given at best we get to travel along at 100km/h I wouldn't expect the additional benefit of a few kilograms to play that big a part in day to day performance. If you can, I guess you could go the illektronic example and rock track spec wheels for when you track the car (which would also allow for track spec rubber) and a bling set for everyday driving.

Haven't seen anyone on this forum rocking a set of BBS CK's yet!!! ($300USD odd each at Tirerack is cheap)

[GTom]

I was nudging towards getting BBS CMs before I got the Team Dynamics Racing Pro Race 1.2 (freaking long name) wheels.

The price for a decent set of wheels was just unbeatable!

They used them over in the UK racing circuit (which one exactly I don't remember) back in 2008

the 18.0 x 8.0 are about 9.0kg (.1 gram less then the standard (smaller) classix)

http://i668.photobucket.com/albums/vv46/Tomka_Zdjecia/Car/DSC04101.jpg

http://i668.photobucket.com/albums/vv46/Tomka_Zdjecia/Car/DSC04102.jpg

Paul_OH has the silver version and look very very nice on his GT

[Justin Fox]

http://i558.photobucket.com/albums/ss25/bettystuff/Rotiform%20Betty/mk5_gti_blq_02.jpg

http://i988.photobucket.com/albums/af8/rotiform/test%20fits/mk5_gti_blq.jpg

Rotiform.

[Frenchie]

Nope not a fan of Rotiform wheels inspired by Lambo's - too busy to the eye but like John mentioned its all subjective :)

Wheels choices are a very personal.
Without looking into performance/weight, wheels can destroy the look of your car or complete the look your car.

Its def something to think about and take your time before splashing on wheels.

[Big Yellow]

got some centre caps on my R8s.

http://img440.imageshack.us/img440/4251/frontr8.jpg

sits pretty flush so fairly happy :D

http://img263.imageshack.us/img263/8404/frontflush.jpg



now needs more low!!!

[ar44]

^ Tight!!

[Pharkus]

^ Tight!!

Are you talking about the wheels in general or BigYellow?

They do look good.

[G-rig]

Nice work Terence came up pretty good.

[nath_mk6]

Looks good :)

[10d]

got some centre caps on my R8s.

http://img440.imageshack.us/img440/4251/frontr8.jpg

sits pretty flush so fairly happy :D

http://img263.imageshack.us/img263/8404/frontflush.jpg



now needs more low!!!
T, it's gonna rub like crazy if you lower it! Get some camber kits! LOL

[SUGA]

Perfect offset Terrence!

[Big Yellow]

Cheers guys!!

Probs sell them at the end of the year for some jap lightweights though!

Tendy, ill probs get coils soon and do all the camber then. Probs get v3s.

[∆pex]

v3's don't have camber plates, you'll have to buy them seperately

[Frenchie]

Looking good BY - now drop that thing !

[Pharkus]

BBS RD Diamond Silver 18 x 7.5 ET 42 5 x 112

http://www.redline-motorworks.com/v/vspfiles/photos/RD%20231%20-%20DSK-2.jpg

From Redline Motorsport $320USD per corner

[Justin Fox]

Clean!

[Frenchie]

Not bad John - not bite the bullet !!

[Justin Fox]

http://www.fame-web.com/shopping/images/univ/wh/yokohama/advan_rz/golf5-l.jpg

http://www.yokohamatire.jp/yrc/japan/wheel/brand/advan_rz_f/image/golf_01.jpg
Advan RZ.

[10d]

The RZ comes in forged now!

[Pharkus]

Not bad John - not bite the bullet !!

Haha can't the RNS510 monster has bitten me. If things work out, I might ask the dealer to also install some Dynaudio speakers in as well. Doing research into the head unit now.

[Big Yellow]

http://www.fame-web.com/shopping/images/univ/wh/yokohama/advan_rz/golf5-l.jpg

http://www.yokohamatire.jp/yrc/japan/wheel/brand/advan_rz_f/image/golf_01.jpg
Advan RZ.
Looks boss!!! Tempted!!

[Frenchie]

Haha can't the RNS510 monster has bitten me. If things work out, I might ask the dealer to also install some Dynaudio speakers in as well. Doing research into the head unit now.

haha - you are on a spending spree John !!

@ Big T - haven't you just purchased a set of wheels >D

[G-rig]

I think Terence would need less aggressive wheels to dump it?

[AP]

BBS RD Diamond Silver 18 x 7.5 ET 42 5 x 112

http://www.redline-motorworks.com/v/vspfiles/photos/RD%20231%20-%20DSK-2.jpg

From Redline Motorsport $320USD per corner

I like the look of these wheels...

[Big Yellow]

haha - you are on a spending spree John !!

@ Big T - haven't you just purchased a set of wheels >D
Haha following in your shoes!!

And greg wont be fully dumped! Just get rid of wheel gap!!

[schoona]

BBS RD Diamond Silver 18 x 7.5 ET 42 5 x 112

http://www.redline-motorworks.com/v/vspfiles/photos/RD%20231%20-%20DSK-2.jpg

From Redline Motorsport $320USD per corner

Too plain. Nice pricing though :)

[Pharkus]

Too plain. Nice pricing though :)

Yeah but I can fit my whole hand in there to clean them without taking them off!

@Frenchie - yeah spending spree is correct. Just did a recount of expenses for the past month and budget for next month. $3.3k on roof for house, $1k on clothing last weekend, $1k for guttering for house next week plus whatever it will cost for the headunit and installation. Also forgot about mirror covers and tripod for my camera. Sigh, stupid Melbourne storms. There goes my wheels and coilover budget. Back to square one.

[Frenchie]

hahah John - I like your style !

Crackers and cheese for lunch and dinner after splashing your $$
I wonder what next month's spending spree is going to be like !?

[Pharkus]

hahah John - I like your style !

Crackers and cheese for lunch and dinner after splashing your $$
I wonder what next month's spending spree is going to be like !?

Nope, gonna have to go bread and water at this rate! Maybe free Milo at work will have to suffice.

[Justin Fox]

http://c3.ac-images.myspacecdn.com/images02/94/l_33527fcefeff4eb1ab79ae2ef84ad30e.jpg
Neuspeed RS10

http://www.golfmkv.com/forums/attachment.php?attachmentid=27468&d=1213287645
Neuspeed RS10

Really good thread with wheel weights for MKV Golf here:
http://golfmkv.com/forums/showthread.php?t=52790

:cool:

[Frenchie]

Just noticed Alpil are doing the W12 wheels. I like them. Wonder what they weigh ?

Tendy where are you !

LINK (http://translate.googleusercontent.com/translate_c?hl=en&sl=ja&u=http://www.newing-inc.com/wheel/W12.html&prev=/search%3Fq%3Dalpil%26hl%3Den&rurl=translate.google.com.au&usg=ALkJrhj_PWdT8-8kaZP7nLSUjDFR_FTfsQ)

http://www.newing-inc.com/wheel/slide_img/home/w12-01.jpg

[10d]

Ahaha. Looks good French! I want one. Bloody AP keep teasing me today :lol:

[Frenchie]

They're pretty reasonable 10d... haha what's Ap tempting you with now !!

[G-rig]

Too plain. Nice pricing though :)

Yeah i'm sure there are other wheels that would be simple like that for a lot less mula.

[Frenchie]

Don't care what you say I love these wheels !!! Dish time >D

http://farm5.static.flickr.com/4059/4534346834_9ec9988ac6_o.jpg

http://farm5.static.flickr.com/4006/4533712349_cedf069cf1_o.jpg

[G-rig]

Wonder how much that panel would cost to fix?

[schoona]

Hes just shelled out 3-4k on wheels plus the refurb, plus the tyres. plus the other malarky like suspension, notched chassis perhaps...the panel is prob leats of his worries, and if he is spending that much coin on stance, im sure he doens't really mind a new panel?

[Justin Fox]

http://farm5.static.flickr.com/4057/4585867149_4d86e351f1.jpg
Argh so hot.

[Justin Fox]

http://carview-img02.bmcdn.jp/carlife/images/user/346586/p1.jpg
17inch TE37's.

[schoona]

Not a fan :(

[G-rig]

x2, that style makes the wheels look quite small.

[schoona]

Work Brombachers

These are normally found on Porkers:

http://www.workwheelsusa.com/media/gallery/25/189_full.jpg

http://www.workwheelsusa.com/media/gallery/25/172_full.JPG

But here (terrible offset on the rear) we have them on a B7 RS4:

http://www.workwheelsusa.com/media/gallery/25/415_full.jpg

I tihnk they would look absolute sex on a MkV.

[Justin Fox]

Not a fan :(

x2, that style makes the wheels look quite small.

They're 17inch. In my opinion all 17inch wheels on a MKV look too small :lol:

http://www.bbs.com/_images/company/fi_polished.jpg

BBS have just released the new BBS FI (FI is short for Forged Individual). The 19" x 8.75" wheel weighs in at a mere 7.4 kg and along with their famous LM and LM-R wheels the Forged Individual Line of wheels will be made at the BBS forging plant in Japan. (Washibeam).

More:
http://www.bbs.com/en/company/news/fi_en.html

[Frenchie]

forget 17's they are a waste of time >D

Love the weight of those BBS FI - not sure on the look though.

19's is a much better option but 8.75 a bit to wide -

I'll wait until Ap or 10d get a set for me to look at and make my final judgement.

[G-rig]

They're 17inch. In my opinion all 17inch wheels on a MKV look too small :lol:

LOL that didn't help, but thought they were bigger than that.


BBS have just released the new BBS FI (FI is short for Forged Individual). The 19" x 8.75" wheel weighs in at a mere 7.4 kg and along with their famous LM and LM-R wheels the Forged Individual Line of wheels will be made at the BBS forging plant in Japan. (Washibeam).


They aren't my cup of tea - look a bit too much like chromies. Pretty light though!

18 x 8 is the best :P

[schoona]

LOL that didn't help, but thought they were bigger than that.



They aren't my cup of tea - look a bit too much like chromies. Pretty light though!

18 x 8 is the best :P

Conservative Greg! I think they would hold up sweet on Tendy's car. Suits perfectly!

[Justin Fox]

Some more pics of it. I think they look very Japanese styled, almost like a Weds Sport wheel, or Enkei. I think they're hot though, for sure.

http://www.auto-blog.pl/wp-content/gallery/186/wimmer-rs-ferrari-f430-scuderia-5.jpg

http://farm5.static.flickr.com/4024/4538575354_c61b3cd34e_o.jpg

http://farm5.static.flickr.com/4054/4525723515_75cfd558a2_o.jpg

http://farm5.static.flickr.com/4035/4526354218_583495e5ac_o.jpg
This Porsche shows the weaker front offset (and thinner wheel width) looks a lot less aggressive than the low offset fat rear wheel.

http://www.wheelsto.com/images/bbs/bbs_fi_e92m3_1.jpg

http://www.wheelsto.com/images/bbs/BBS_FI.jpg

http://www.bbs-racing-wheels.com/seiten/gif.bilder/ficc.jpg

[AP]

These look hot in Black!!!


They're 17inch. In my opinion all 17inch wheels on a MKV look too small :lol:

http://www.bbs.com/_images/company/fi_polished.jpg

BBS have just released the new BBS FI (FI is short for Forged Individual). The 19" x 8.75" wheel weighs in at a mere 7.4 kg and along with their famous LM and LM-R wheels the Forged Individual Line of wheels will be made at the BBS forging plant in Japan. (Washibeam).

More:
http://www.bbs.com/en/company/news/fi_en.html

[AP]

Yeah Baby, The Black ones on the 430 are very sexy!! I think some of you need to get your eyes tested!! Hahaha



Some more pics of it. I think they look very Japanese styled, almost like a Weds Sport wheel, or Enkei. I think they're hot though, for sure.

http://www.auto-blog.pl/wp-content/gallery/186/wimmer-rs-ferrari-f430-scuderia-5.jpg

http://farm5.static.flickr.com/4024/4538575354_c61b3cd34e_o.jpg

http://farm5.static.flickr.com/4054/4525723515_75cfd558a2_o.jpg

[Justin Fox]

Ah of-course now I remember why they look so JDM to me:

http://image.superstreetonline.com/f/27134884+w750+st0/sstp_1001_29_o+lexus_lfa+wheels.jpg

http://i582.photobucket.com/albums/ss265/aaxoro430/2011_Lexus_LFA.jpg

http://media.il.edmunds-media.com/lexus/lfa/2011/as/09/to/2011_lexus_lfa_f34_09-to-as_1_717.jpg

I actually prefer the one's on the LFA but regarding the BBS: I'm sold. I love them. I'd rock some gunmetal grey ones, or black on my GTI any day (someone sponsor me :lol:).

[10d]

Damn, those FI looked hot!

I agree that it looked too JDM for some.

[Big Yellow]

im not diggin them!!

LM-Rs look wayyyyyyyyyyyyyy better!!!

[Tim]

this is what I first thought when I saw them. Expensive doesnt always = pretty

http://farm3.static.flickr.com/2768/4252600753_491b33e4e2.jpg

[burgs]

I like them, id definately go the LM's first, but these are hot :)

[Justin Fox]

Expensive doesnt always = pretty

Totally agree with this statement (I think the Bugatti Veyron is disgustingly ugly and I'm pretty sure it's expensive) but who said anything about the wheels being expensive? Or anything about expensive items being instantly pretty?

Each to their own for sure though. Personally I think they're dead sexy regardless of price and what makes them even sexier to me is that they're:

- Forged in Japan
- Designed by BBS (I'd say BBS is a pretty reputable brand)
- Lightweight (impressively so too)
- Strong

It's not often you find a stylish rim which is also a performance rim. Yes the CE28 and TE37 has become a much loved JDM rim on a visual level, but if they were of bad quality, heavy and weak that status would never have been reached. I think this wheel is the beginning of a new direction for future lightweight performance wheels which put a lot of value on appearance as well.

[schoona]

Totally agree with this statement (I think the Bugatti Veyron is disgustingly ugly and I'm pretty sure it's expensive) but who said anything about the wheels being expensive? Or anything about expensive items being instantly pretty?

Each to their own for sure though. Personally I think they're dead sexy regardless of price and what makes them even sexier to me is that they're:

- Forged in Japan
- Designed by BBS (I'd say BBS is a pretty reputable brand)
- Lightweight (impressively so too)
- Strong

It's not often you find a stylish rim which is also a performance rim. Yes the CE28 and TE37 has become a much loved JDM rim on a visual level, but if they were of bad quality, heavy and weak that status would never have been reached. I think this wheel is the beginning of a new direction for future lightweight performance wheels which put a lot of value on appearance as well.

x2

Although there is such a thing as "too much TE37", haha. I don't think this wheel is that accessible it will ever be too "played".
I love it, would probably go the LM's still though :)

[Tim]

Totally agree with this statement (I think the Bugatti Veyron is disgustingly ugly and I'm pretty sure it's expensive) but who said anything about the wheels being expensive? Or anything about expensive items being instantly pretty?


No-one said anything about expensive wheels before I did. Amazingly I am capable of an original thought :D

But I think people do sometimes put too much focus on the brand/weight of a rim for added street cred moreso than performance. Its no big deal though. If they got the dollars then go for it by all means. Id say that most people see aftermarket wheels as more of a fashion accessory and there are a lot of cheap good looking wheels out there.

Anyways back to the bbs rims. As you say each to their own and I think they look awful!

[chewy7]

Damn those BBS make me weak at the knee's!! They also look similar to the oem sports pack wheels on the e70 x5.

[G-rig]

Conservative Greg! I think they would hold up sweet on Tendy's car. Suits perfectly!

Ok, 18 x 8.5 haha.

[Byza]

ill have to add my whoring on my wheels on the monday after nationals!!!!!!!!!

those BBS as very dope...

my favorite rims company in the market right now is ISS Forged... Quality and build from these guys is amazing... Im currently working on ordering a set of rims through these guys for my good mates Gallardo... hopefully looks pretty good...

http://i42.tinypic.com/2d2isls.jpg

http://i43.tinypic.com/2rc0r2b.jpg

http://i40.tinypic.com/160bqd1.jpg

http://i41.tinypic.com/2vj6dc2.jpg

http://i39.tinypic.com/1zx9w14.jpg
http://i39.tinypic.com/ev8ly0.jpg

http://i40.tinypic.com/24b293t.jpg

[G-rig]

Those look awesome byza, pretty top quality craftsmanship too by the look of it.

Can't wait to see yours in the flesh.

[schoona]

That white GTR looks awesome, and the wheels above it look like LM's plus the craziness it doesn't have :D

[Frenchie]

Dish anyone !

http://farm2.static.flickr.com/1276/4602970173_47632cd20b_o.jpgTasty

http://farm5.static.flickr.com/4052/4603584906_3f8b665191.jpgRonal with a touch of BBS

http://farm2.static.flickr.com/1232/4602970317_92055bd26a.jpgDelicious Alphards

http://farm2.static.flickr.com/1306/4602970385_94319bc470.jpgmmm

http://farm2.static.flickr.com/1151/4602970463_9598f60d0a.jpgNicely done BBS CK

http://farm5.static.flickr.com/4014/4602970601_c923fd90d3.jpghttp://farm2.static.flickr.com/1236/4603585146_e0ffd41a20.jpgHow sexy are those Bentleys !!

http://farm5.static.flickr.com/4026/4602970635_d5c824a9b7_o.jpgRonal godness

http://farm4.static.flickr.com/3088/4603585290_da30685477_o.jpgTime to gangsta !!

http://farm4.static.flickr.com/3409/4603585340_8748f6e4ed_o.jpgmmm can't go wrong with these

http://farm2.static.flickr.com/1129/4603585432_375d384915.jpg

[Tinto]

anyone noticed slammed mk4's rear wheels sit really awkwardly in the wheel well?
i.e. they seem to move so far forward - where the mk5 looks like it just moves straight up/down.
Can anyone shed some light on why that happens?

[AP]

That gold BBS CK on the red R looks nice!

[Frenchie]

anyone noticed slammed mk4's rear wheels sit really awkwardly in the wheel well?
i.e. they seem to move so far forward - where the mk5 looks like it just moves straight up/down.
Can anyone shed some light on why that happens?

Not too sure T ?


That gold BBS CK on the red R looks nice!

Not bad hey !

Nasty

http://farm2.static.flickr.com/1136/4603039849_80e71cf7aa_o.jpg

http://farm2.static.flickr.com/1263/4603654004_d382dae780_o.jpg

http://farm5.static.flickr.com/4069/4603039969_da9067cc6a_o.jpg

http://farm5.static.flickr.com/4052/4603654112_d3850e8ecd.jpg

[schoona]

http://farm4.static.flickr.com/3409/4603585340_8748f6e4ed_o.jpgmmm can't go wrong with these



Porsche Teledials :)

[schoona]

http://farm2.static.flickr.com/1232/4602970317_92055bd26a.jpg


Schmidt TH Lines :)

[schoona]

anyone noticed slammed mk4's rear wheels sit really awkwardly in the wheel well?
i.e. they seem to move so far forward - where the mk5 looks like it just moves straight up/down.
Can anyone shed some light on why that happens?

Don't know why, but yes all mk4s manage to get increased Castor when slammed.

[saad]

Team Dynamics Pro Race 1.2 :) Strong, lightweight, wel priced, and tough looking:

http://nexxcar.nexxtrade.de/images/Pro-Race%201-freigestellt.jpg

http://i698.photobucket.com/albums/vv349/crankandpiston/phil/golf/speedhunters/crankandpistongolf15.jpg



My next wheels will be some Advans though

[Justin Fox]

Spotted today in Coogee Beach:

http://farm2.static.flickr.com/1332/4602905257_da6dfd58bc_o.jpg
Hmmmm those Ford wheels look a lot like the wheels on Tendy's X5 no?

http://farm2.static.flickr.com/1396/4602905337_5bc070838d_o.jpg
10 seconds later, daym those wheels on the Holden across the street look the same too?!

[schoona]

And the XR5 and Gallardo, nice looking wheel though! :)

[schoona]

Calling BY et al looking for Alphards.

http://www.carshine.com.au/

Go to the mercedes clearance section ;)

They are exxy, but right on your door Terrence :D

[Big Yellow]

Haha they have been on that site for ages!!!

Im eyeing off some rays forged wheels when i get some cash together :D

[schoona]

Haha yeah I had seen them ages ago, was looking for wheels for my old man's GTI and saw those, thought of oyu. Lol. All the best :)

[burgs]

Haha they have been on that site for ages!!!

Im eyeing off some rays forged wheels when i get some cash together :D

Nice, cant wait to see how these look on your car :)

[schoona]

They could be any of 30 forged rays wheels, but we wait with baited breath. lol

[schoona]

Golfs + Work Meisters YES YES YES!

http://i322.photobucket.com/albums/nn434/jdotlim/IMG_8711.jpg

http://i322.photobucket.com/albums/nn434/jdotlim/_DSC6329.jpg

http://i322.photobucket.com/albums/nn434/jdotlim/_DSC6366.jpg


http://forums.vwvortex.com/showthread.php?4885776-FOR-SALE-Work-Meister-S1-2-Piece-17x8-35-17x9-35-with-Federal-SS595

Do want!

[schoona]

OR the other direction, Aston Martin Vanquish:

http://i880.photobucket.com/albums/ac5/dasford/rim1.jpg?t=1269369395

http://forums.vwvortex.com/showthread.php?4816865-19x9-ASTON-MARTIN-VANQUISH-RIMS

[PassthatR]

http://carview-img02.bmcdn.jp/carlife/images/user/346586/p1.jpg
17inch TE37's.
Why do Volk only offer weak offsets and widths for the veedub clan.. :(

[MasterKevin]

Why do Volk only offer weak offsets and widths for the veedub clan.. :(

Cause they more focus on JDM cars :P

[PassthatR]

Cause they more focus on JDM cars :P
Haha, valid point. But haven't they heard of brand and product diversification? :P We want some beefy 9" et30 wheels as well >D

So yes, we're looking for some new wheels for the '36. Using Ross's wheels as a guide on fitment and profile, we'll be going with something around 19x8.5 et30-35. VMR's look tempting price-wise...

[Justin Fox]

Come on, spend up and buy some real wheels! The car is totally worth it!

[PassthatR]

Well, Enkei RPF1 19x8 et35 are on the cards. :)

How much do you think special order Volk TE37s in the same spec would be? Well above $4k huh?

[Justin Fox]

Yes, more like $5k, maybe more but that's about right for some quality rims in my opinion. Top shelf stuff isn't cheap and your R36 is certainly top shelf! :)

[PassthatR]

Hmm. I'll have to consult the boss on this one... thanks for your thoughts Justin! :)

Advan RS's are on the list too.

[Justin Fox]

Just thought I'd post more pics of the sexy 19inch Alip W12 wheel:

http://www.newing-inc.com/wheel/slide_img/home/w12-01.jpg

http://www.newing-inc.com/wheel/slide_img/home/w12-02.jpg

http://www.newing-inc.com/wheel/slide_img/home/w12-03.jpg

http://www.newing-inc.com/wheel/slide_img/home/w12-05.jpg

http://www.newing-inc.com/wheel/slide_img/home/w12-06.jpg

http://www.newing-inc.com/wheel/slide_img/home/w12-07.jpg

http://www.newing-inc.com/wheel/slide_img/home/w12-08.jpg

http://www.newing-inc.com/wheel/slide_img/home/w12-09.jpg

http://www.newing-inc.com/wheel/slide_img/home/w12-10.jpg

[schoona]

That $hit is too hot for this forum....

[AP]

Good looking wheel!!

[10d]

It is a good looking wheels :)

[G-rig]

Those Alpil's aren't bad.

[elisiX]

I've been pretty keen on the VMR710 as an alternative to a more expensive BBS setup.

Today I came across these wheels - very similar to the VMR710 but with a potentially nicer finish.

Actually the finish on these is much closer to the original wheel that both of these below are copying - from HRE.

Räderwerks AG-310
http://farm5.static.flickr.com/4031/4640484112_cb23e3b861_o.jpg

http://forums.vwvortex.com/showthread.php?4899847-**-NEW-**-AG-310-18x8-9-et48-50-Monoblock....R%E4derwerks.com

I've emailed them to find out more as they're brand new but they look promising.

And the VMR710

http://c4.ac-images.myspacecdn.com/images01/99/l_d1b42910db2dfe376699d8328cd29cff.jpg

[Pharkus]

$900 for the set Jay or each? I've sent off a query to them for a price and shipping to Australia. If you are still interested could potentiall be a group buy of 2?

[elisiX]

It's $575 USD shipped to Australia.

And yes, $900 for the set.

He can get them in Black and Grey painted inside finish.

I am asking him for pics right now actually - real life pictures.

[elisiX]

Also, might benefit in terms of shipping to get 2 sets, but if we order 1 set it'll be $900 USD on the paperwork, not over $1000 (no duty).

Another thing to consider is the BBS CK from http://www.amgaustralia.com/specials/

They're doing the 18's for $580 a corner!... now against the option I had above from the USA, $575+$900 USD converted to AUD is about $1800.

So perhaps the BBS wheels would be a no brainer.

[Pharkus]

Also, might benefit in terms of shipping to get 2 sets, but if we order 1 set it'll be $900 USD on the paperwork, not over $1000 (no duty).

Another thing to consider is the BBS CK from http://www.amgaustralia.com/specials/

They're doing the 18's for $580 a corner!... now against the option I had above from the USA, $575+$900 USD converted to AUD is about $1800.

So perhaps the BBS wheels would be a no brainer.

So you got quoted $575USD shipping? Ouch.

It does seem like the BBS CK's are an option. BTW BBS CK in Brilliant Silver are only $565 per corner (full RRP I'm assuming).

[Big Yellow]

John u sure u want to run a staggered setup??

[elisiX]

You can get them in standard Terence. :)

And those BBS CK's I mentioned are for a BMW.

[Big Yellow]

You can get them in standard Terence. :)

And those BBS CK's I mentioned are for a BMW.
Oh ok cos that link to vortex said he wouldnt split the sets.

[Pharkus]

John u sure u want to run a staggered setup??

I won't be running staggered. I have also included that in my e-mail, awaiting a response.

@Jay - The BBS CK's I've quoted are specifically for the R32 per the wheel selector on the AMG website. At a guess you'd still be looking in the vacinity of say $2,500 incl shipping (as I'm not in NSW), unless I can access through Jaxquickfit.

[elisiX]

Oh ok cos that link to vortex said he wouldnt split the sets.

I missed that part. Havent ask them about this.

Staggered is possible on AWD only right? I dont know. lol

If its possible to have them staggered on a FWD, is that bad?

I had a staggered setup on my old TT but it was Quattro.

http://i338.photobucket.com/albums/n408/elisix_album/IMG_0087.jpg
http://i338.photobucket.com/albums/n408/elisix_album/IMG_0089.jpg

[Big Yellow]

There is no reason why you cant, i was only pointing that out to john cos he wouldnt be able to rotate his wheels if running a staggered setup.

I would run staggered, but i like my tires lasting a while more hahaha

[elisiX]

haha good point.

The other consideration is that these wheels are all 18's.. I would actually prefer 19's.

Just considering the BBS CH... not sure if I am feeling them on a MK6 GTI.

http://i840.photobucket.com/albums/zz322/gt1210/Photo0373.jpg

Need to find pictures of the CK on a MK6 GTI.

[Pharkus]

You should also find out the difference in the cost of tyres for the 19's as well Jay. Most likely that will be an increase in cost of a consumable (unless you plan on selling the car before you need to replace them).

[Jig]

haha good point.

The other consideration is that these wheels are all 18's.. I would actually prefer 19's.

Just considering the BBS CH... not sure if I am feeling them on a MK6 GTI.

http://i840.photobucket.com/albums/zz322/gt1210/Photo0373.jpg

Need to find pictures of the CK on a MK6 GTI.

It probably needs to be lowered before you can feel the love for the BBS CH on the MK6 GTI.

[Jig]

Just thought I'd post more pics of the sexy 19inch Alip W12 wheel:

http://www.newing-inc.com/wheel/slide_img/home/w12-01.jpg

http://www.newing-inc.com/wheel/slide_img/home/w12-02.jpg

http://www.newing-inc.com/wheel/slide_img/home/w12-03.jpg

http://www.newing-inc.com/wheel/slide_img/home/w12-05.jpg

http://www.newing-inc.com/wheel/slide_img/home/w12-06.jpg

http://www.newing-inc.com/wheel/slide_img/home/w12-07.jpg

http://www.newing-inc.com/wheel/slide_img/home/w12-08.jpg

http://www.newing-inc.com/wheel/slide_img/home/w12-09.jpg

http://www.newing-inc.com/wheel/slide_img/home/w12-10.jpg

Isn't that 10d's new wheel? Looks fab.

[G-rig]

haha good point.

The other consideration is that these wheels are all 18's.. I would actually prefer 19's.

Just considering the BBS CH... not sure if I am feeling them on a MK6 GTI.

http://i840.photobucket.com/albums/zz322/gt1210/Photo0373.jpg

Need to find pictures of the CK on a MK6 GTI.

I'm not feeling the CH either but there's a better pic of a white mk6 in the mk6 pic thread.

Need something with straiter lines on the mk6 IMO, my OZ wheels would have looked good, prob better than on mkv!

[G-rig]

There is no reason why you cant, i was only pointing that out to john cos he wouldnt be able to rotate his wheels if running a staggered setup.

I would run staggered, but i like my tires lasting a while more hahaha

I wouldn't personally, bit silly on a FWD (FWD bias). Looks tough on those done up MK1's/MK3's..

My Falken's didn't last that long anyway haha.

[elisiX]

Quite like these wheels..

http://www.talebtyres.com.au/content/products/bg_tenspec_blk_mach_face.jpg

Yes they're cheap wheels from one of 'those' places but I like the look. 19x8.5 ET45

[AP]

I really like these ones, But not sure if they would look right on my car!! Tendy you are such a trend setter!! Hahaha


sexy 19inch Alip W12 wheel:

http://www.newing-inc.com/wheel/slide_img/home/w12-02.jpg

[nath_mk6]

Quite like these wheels..

http://www.talebtyres.com.au/content/products/bg_tenspec_blk_mach_face.jpg

Yes they're cheap wheels from one of 'those' places but I like the look. 19x8.5 ET45

Nice straight lines

[Pharkus]

Nice straight lines

Absolute nightmare to clean between those spokes though! Still I like the design, even if it is from one of "those" places.

BTW confirmed wiht the seller of the HRE wheels, staggered only =(

[elisiX]

Well the centres are painted black (like the Detroits) so keeping them looking clean wont be too much hassle.

Machined finish also which looks awesome. Will check them out this weekend. They're only like $1200-1300 without tyres!

Very cheap but a nice looking wheel. I believe they're made by / sold as Lenso also. Nothing special but nice and cheap cheap. :)

Would like to get the BBS ultimately, but I just cant decide on a style that will suit the MK6 GTI perfectly.

That and i've spent WAY too much money on watches this month!

[10d]

LOL. John & Frenchie's fault!

[Frenchie]

Leave me out of this >D

I have been drooling over a set of wheels at the moment for possibly next project.. Too nice and too $$

[Frenchie]

Tasty

http://farm5.static.flickr.com/4016/4659146927_5a71b0428e_b.jpg

Not tasty

http://farm5.static.flickr.com/4001/4659769454_c9b3fbc549_b.jpg

Beetle Bling

http://farm5.static.flickr.com/4011/4659715776_1f8bd56ab5_b.jpg

Love Helios wheel - shame they are so heavy

http://farm5.static.flickr.com/4003/4659714312_04a974fd15_b.jpg

Tasty VSXX

http://farm5.static.flickr.com/4034/4659090815_8915a6961c_o.jpg

Tendy's custom teddybear wheel edition >D

http://farm5.static.flickr.com/4022/4659090571_8fe010a9b7_o.jpg

Bentley love

http://farm2.static.flickr.com/1290/4659090231_78eac51cbf_b.jpg

[nath_mk6]

lol @ the tendy wheel....

some nice wheels and some not so nice ones, hae to say I dont mind the Bentley wheels but they look off to me on that Golf, just not quite right imo

[Justin Fox]

Man those Tendy wheels are sooo rare I am always looking for some on eBay!

[Justin Fox]

http://www.ssr-wheels.com/images/typef_euro/gallery/1.jpg
New SSR Type-F for VW.

[AP]

http://www.ssr-wheels.com/images/typef_euro/gallery/1.jpg
New SSR Type-F for VW.

Haha the funny Justin I was looking at the 19x8 for the golf!!
Nice wheel!!

[nath_mk6]

Jig, the VW Racing wheels I was talking about at Pizza, they are 19x8.5 ET52 with each wheel weighing 13Kg. £1,000 for a set.

http://www.volkswagenracing.co.uk/Golf%206%20Pages/1378836-2.jpg

http://www.volkswagenracing.co.uk/Golf%205%20Pages/WHeels%20(grey).JPG

http://www.volkswagenracing.co.uk/Golf%205%20Pages/clip_image002.jpg

[Tim]

13kg is pretty damn heavy!

[nath_mk6]

yeah not forged, but only 1kg heavier than the stock 18s

[Justin Fox]

http://www.wfsu.net/blog/header/4.jpg
RS

[G-rig]

Those SSR Type-F look the business!

[Frenchie]

yeah not forged, but only 1kg heavier than the stock 18s

Sexy wheels and great price but yeah a little bit on the porky side.

[stephen8512]

http://www.wfsu.net/blog/header/4.jpg
RS

Man, if i could find some 17's RS's i'd snap them up so quick!!!

cant find any in the right offset....even on ebay.de

[Big Yellow]

Man, if i could find some 17's RS's i'd snap them up so quick!!!

cant find any in the right offset....even on ebay.de

Dom has a set in his garage which he is refurbing!! I wish i could afford them lol!!

[Jig]

Jig, the VW Racing wheels I was talking about at Pizza, they are 19x8.5 ET52 with each wheel weighing 13Kg. £1,000 for a set.

http://www.volkswagenracing.co.uk/Golf%206%20Pages/1378836-2.jpg

http://www.volkswagenracing.co.uk/Golf%205%20Pages/WHeels%20(grey).JPG

http://www.volkswagenracing.co.uk/Golf%205%20Pages/clip_image002.jpg

Thanks Nath. Same weight as the OEM Omantys.

[G-rig]

I heard the Omyants were 12.25kg, but much the same I guess.

Those look fairly good Jig..

[burgs]

I rate them, they look pretty tough :)

[schoona]

http://i263.photobucket.com/albums/ii140/schoona/bxvcxbfb.jpg

http://i263.photobucket.com/albums/ii140/schoona/1fbdzfds.jpg

Rial Daytonas :D Hot hot mesh wheel.

[HOTHATCH]

R8 copies on a Mk6. St. George Tyres are selling these on ebay. Wheels and tyres for $1300. For an extra $100 they will upgrade the tyres to Kumho KU 31's.

http://i116.photobucket.com/albums/o14/the_dogs/r8whitegti.jpg

[schoona]

http://i6.photobucket.com/albums/y221/dubstarmk2/car%20stuff/4607850857_7e7ae1a9e6_b.jpg

http://i6.photobucket.com/albums/y221/dubstarmk2/car%20stuff/4647885600_bca5fb4561_o.jpg

http://i6.photobucket.com/albums/y221/dubstarmk2/car%20stuff/4672836269_97a71944ea.jpg

...

[stephen8512]

Dom has a set in his garage which he is refurbing!! I wish i could afford them lol!!

?!!

who is this dom? whats his username here?

and where did he get them from?!?! I WANT THEM!!!!!

[Big Yellow]

?!!

who is this dom? whats his username here?

and where did he get them from?!?! I WANT THEM!!!!!

Too late :P

[Byza]

Too late :P

LOL Gold...

[G-rig]

Too late :P

Getting some new shoes T?

[Big Yellow]

Getting some new shoes T?

dunno what you're talkin bout mate :P

[Justin Fox]

dunno what you're talkin bout mate :P

OMFG RS"!!!!!!!!!!

[Big Yellow]

http://i489.photobucket.com/albums/rr253/tns247/photo-1.jpg

do want this......

[Frenchie]

mmmm would be nice to see someone do it.

[Byza]

its getting done............

[SUGA]

omg wow!!!!!!!!

[Big Yellow]

i just hope i dont need to sell any kidneys etc to build them HAHAHAHAHA

[Pharkus]

i just hope i dont need to sell any kidneys etc to build them HAHAHAHAHA

Sure you have any kidneys in worthy condition to sell in the first place Terrence? Would look hot!

[Big Yellow]

Sure you have any kidneys in worthy condition to sell in the first place Terrence? Would look hot!

I think you're thinking bout my lungs haha

[Black Hand]

i just hope i dont need to sell any kidneys etc to build them HAHAHAHAHA


u may have to >D

i seen it done here in new york but the wheels were white the look stick do it

[Big Yellow]

my current desktop background. so much inspiration right there LOL

http://i489.photobucket.com/albums/rr253/tns247/photo-2.jpg

[Pharkus]

my current desktop background. so much inspiration right there LOL

http://i489.photobucket.com/albums/rr253/tns247/photo-2.jpg

Needs more low mate, I can still see daylight coming from underneath.

Inpiration to go clean your car?

[stephen8512]

I reckon those would look a lot better on my jetta T.....so yeah.....if u wanna just hand them over i'd appreciate that !!! kthxbye! hahaha
>D>D

seriously though, how the hell did dom get these wheels?! (whats his username?) I have never found one in the right offset.....not for MK5 golfs/jettas anyway? Must be super rare

[schoona]

Dom is WABIT off watercooled. Had a super sexy yellow mk1 and now has a bagged B3 passat on Modenas. Loves his wheels!

I'm not sure these are a wheel you would just walk in to a tyre shop and ""buy in my size". I think you find a second hand set )or pay big for new ones from Japan.
Second hand set will require adapters and usually be a lower offset to suit other cars, so the offset is then helped by the width of the adapter to get them flush or a bit of poke. Plus there are all the different combinations of lip/barrel/centre lips too.

A lot of effort required to get these on which makes them so much more impressive ! :)

[Big Yellow]

Well said Mal!!!

My main concern with these RS's is obviously offset fitment, and also brake clearance!! I think Michaelmark5 had to run spacers to clear his brake calipers so i will have to look at that too.

It will be a lot of messing around before any parts are even ordered to start the rebuilding!

[schoona]

Amateurs :P

Haha they will look great Terrernce!

ECS sell good quality H&R spacers, my adapters are perfect.
I got to shave my brakes too, otherwise I'll have too much poke.

You'll work it out :)

[vdubin]

Are these just steelies with custom made caps ? any info ? and anyone got more pics of this car.

http://i307.photobucket.com/albums/nn285/reece7000/Samongolf3.jpg

[Frenchie]

Naked Red !

[G-rig]

Wouldn't be surprised if those wheels were off an old beetle.
Rear valance looks sick (as in puke).

[nath_mk6]

Are these just steelies with custom made caps ? any info ? and anyone got more pics of this car.

http://i307.photobucket.com/albums/nn285/reece7000/Samongolf3.jpg

interesting look, a bit of the 50s thrown in with the white walls, it looks a bit pink though with a red strip along the bottom of the doors. As for the stars greg, not my thing and I'd say that it may be a chicks car? but I'd say puke is going a bit far...

[vdubin]

I love the car its unique.
And I hope its a girls car !
The wheels prob are from a old vw the white walls really finish it off .
Why I ask this question is because I have a set of steelies but want to hide the bolts like hers ? his lol
I was looking at mooncaps too but this looks neat .

[Jig]

No door handles. must be button operated.

[vdubin]

fully shaved :D

[AP]

This golf has had a Brazilian!!


Are these just steelies with custom made caps ? any info ? and anyone got more pics of this car.

http://i307.photobucket.com/albums/nn285/reece7000/Samongolf3.jpg

[Tim]

I love the car its unique.
And I hope its a girls car !
The wheels prob are from a old vw the white walls really finish it off .
Why I ask this question is because I have a set of steelies but want to hide the bolts like hers ? his lol
I was looking at mooncaps too but this looks neat .

They look like VW caddy steelies. They come with black centre caps

[vdubin]

Haha Brazilian indeed apmitchell.

Heres a pic of the front colour looks totally different in this one
http://i307.photobucket.com/albums/nn285/reece7000/samonGolf.jpg

Interesting Tim I'll look into that.

[Frenchie]

BS SUPER-RS
5Hx112 @ 19x9 et 38, 19x9 et 38 Super Rare 19" Super RS!

Worth a look on this site

http://www.memoryfab.com/wheels

[chewy7]

BS SUPER-RS
5Hx112 @ 19x9 et 38, 19x9 et 38 Super Rare 19" Super RS!

Worth a look on this site

http://www.memoryfab.com/wheels

Bloody hell those are nice!! If only the offset was a bit better. +45 to +50 would be ideal..

[Frenchie]

...
http://farm5.static.flickr.com/4115/4737193285_85ffb7f449_b.jpg

http://farm5.static.flickr.com/4122/4737204013_a19b296f0e_b.jpg

http://farm5.static.flickr.com/4117/4737204113_17f70cc7e0_b.jpg

http://farm5.static.flickr.com/4134/4737208239_75e6475b5a_b.jpg

[nath_mk6]

:lol: now thats low, love the 'Dollar bill' mod

[ben oz]

...
http://farm5.static.flickr.com/4115/4737193285_85ffb7f449_b.jpg


Any Idea of the brand / model???

Im thinking they would look very nice on the R32;)

[schoona]

Not 100% on wheel deets, more inspiration here though.

http://www.youtube.com/watch?v=aG13GSYzaeA

[G-rig]

I think i would love these black wheels like Tendy's on a Candy white GTI/R, ultra hot while keeping to the OEM theme

(like them a lot more than the Talladega's):

http://img713.imageshack.us/img713/3370/alpilw122.png

http://img293.imageshack.us/img293/7226/alpilw123.png

[elisiX]

Having seen 10d's in person, these 19" wheels easily look like 20" against my 18" Detroit's.

[Jig]

Cant go wrong with this new Alpil wheels. 10d's look good against his CW.

[10d]

>D bwahaha. It's coming guys!

[AP]

Oh your wheels look hot tendy!

[Jig]

Been @ Ramspeed HQ today and they finished their wheel gallery. Here are some wheels from Brabus, ABT Sportsline, Techart, AC Schnitzer et al. Gallery looks great.

Techart
http://i978.photobucket.com/albums/ae266/jig69r/Ramspeed/Techart-wheel.jpg

ABT Sportsline
http://i978.photobucket.com/albums/ae266/jig69r/Ramspeed/ABT-BR-Wheel.jpg

Brabus
http://i978.photobucket.com/albums/ae266/jig69r/Ramspeed/Brabus-Wheel.jpg

Misc
http://i978.photobucket.com/albums/ae266/jig69r/Ramspeed/Ramspeed-Wheel-CollectionII.jpg
http://i978.photobucket.com/albums/ae266/jig69r/Ramspeed/Ramspeed-Wheel-Collection.jpg

[Big Yellow]

can't say i'm a big fan of any of those :(

[Pharkus]

can't say i'm a big fan of any of those :(

Hey now! The Brabus don't look too bad but would be a mofo to clean.

[Robby_jai]

can't say i'm a big fan of any of those :(

gotta agree with you there mate. cant say i am liking any of those... maybe the ABT one...

[schoona]

Brabus FTW out of those. Depends, if they are for golfs, probably not. Anything remotely VIP can make lots of those wheels work with width and offset though!!

[Jig]

Agree with all of you as well but these wheels definitely are'nt meant for our VWs. Brabus=Mercs, ABT = Audis especially the R8, AC Shnitzer=Cooper/BMW. I have seen a C63 AMG with these brabus wheels and it looked hot. These are all forged as well and they are super light except for the ABT one. These manufacturers usually only have 1 offset. To make them fit on Euro cars, they simply add spacers which is not illegal in Europe at all. So from a manufacturing perspective, its so much simpler and no doubt save some serious cash flow. Unfortunately after market spacers here in AU are illegal although heard that they can be engineered to be legal...

[BBR32]

Been @ Ramspeed HQ today and they finished their wheel gallery. Here are some wheels from Brabus, ABT Sportsline, Techart, AC Schnitzer et al. Gallery looks great.

Techart
http://i978.photobucket.com/albums/ae266/jig69r/Ramspeed/Techart-wheel.jpg

ABT Sportsline
http://i978.photobucket.com/albums/ae266/jig69r/Ramspeed/ABT-BR-Wheel.jpg

Brabus
http://i978.photobucket.com/albums/ae266/jig69r/Ramspeed/Brabus-Wheel.jpg

Misc
http://i978.photobucket.com/albums/ae266/jig69r/Ramspeed/Ramspeed-Wheel-CollectionII.jpg
http://i978.photobucket.com/albums/ae266/jig69r/Ramspeed/Ramspeed-Wheel-Collection.jpg

yeah i was there the other day .the R8 V10 rims are sweet

[stevie]

Spotted on the net

http://farm5.static.flickr.com/4027/4577271734_b148e09373_z.jpg

[Jig]

Some new ADV1 Wheel photo shoots. Enjoy.

http://i978.photobucket.com/albums/ae266/jig69r/ADV%20Wheels/pic24.jpg
http://i978.photobucket.com/albums/ae266/jig69r/ADV%20Wheels/pic23.jpg
http://i978.photobucket.com/albums/ae266/jig69r/ADV%20Wheels/pic22.jpg
http://i978.photobucket.com/albums/ae266/jig69r/ADV%20Wheels/pic21.jpg
http://i978.photobucket.com/albums/ae266/jig69r/ADV%20Wheels/pic20.jpg
http://i978.photobucket.com/albums/ae266/jig69r/ADV%20Wheels/pic19.jpg
http://i978.photobucket.com/albums/ae266/jig69r/ADV%20Wheels/pic18.jpg
http://i978.photobucket.com/albums/ae266/jig69r/ADV%20Wheels/pic17.jpg
http://i978.photobucket.com/albums/ae266/jig69r/ADV%20Wheels/pic16.jpg
http://i978.photobucket.com/albums/ae266/jig69r/ADV%20Wheels/pic14.jpg
http://i978.photobucket.com/albums/ae266/jig69r/ADV%20Wheels/pic13.jpg
http://i978.photobucket.com/albums/ae266/jig69r/ADV%20Wheels/pic12.jpg
http://i978.photobucket.com/albums/ae266/jig69r/ADV%20Wheels/pic11.jpg
http://i978.photobucket.com/albums/ae266/jig69r/ADV%20Wheels/pic10.jpg
http://i978.photobucket.com/albums/ae266/jig69r/ADV%20Wheels/pic9.jpg
http://i978.photobucket.com/albums/ae266/jig69r/ADV%20Wheels/pic8.jpg
http://i978.photobucket.com/albums/ae266/jig69r/ADV%20Wheels/pic7.jpg
http://i978.photobucket.com/albums/ae266/jig69r/ADV%20Wheels/pic6.jpg
http://i978.photobucket.com/albums/ae266/jig69r/ADV%20Wheels/pic5.jpg
http://i978.photobucket.com/albums/ae266/jig69r/ADV%20Wheels/pic4.jpg
http://i978.photobucket.com/albums/ae266/jig69r/ADV%20Wheels/pic3.jpg
http://i978.photobucket.com/albums/ae266/jig69r/ADV%20Wheels/pic2.jpg
http://i978.photobucket.com/albums/ae266/jig69r/ADV%20Wheels/pic1.jpg

[G-rig]

Those ADV1 wheels look awesome, what style are you getting Jig?
(The they have different names for them etc)?

[Jig]

The ADV 5.1 Single Piece Forged in Satin Matt Black G-Rig. Thinking of getting the same for my wife's R36 but in Brushed aluminium finish.

[G-rig]

Those 5-spokes should look pretty special Jig..
Love how most of the ADV wheels are concave.

[chewy7]

*runs for box of tissues*


damn those are some seriously hot wheels! Love when they make vehicle specific stuff and nail the width/size/offset.

[Frenchie]

Those 5-spokes should look pretty special Jig..
Love how most of the ADV wheels are concave.

Indeed nice wheels but wont get much concavity with our offsets

[Justin Fox]

http://farm5.static.flickr.com/4075/4809664333_6fc20e917b_b.jpg
So yum!

[drewr]

Only work is, wow! Bloody unreal.

[schoona]

Teledials on the Mk5. That's big pimpin' !

[Paul_OH]

Man these look hot in this size and offset (17x9 ET30)

http://i71.photobucket.com/albums/i150/minimadgriff/BTCC%20prep%20-%20re-build/DSC03372.jpg

http://i71.photobucket.com/albums/i150/minimadgriff/BTCC%20prep%20-%20re-build/DSC03368.jpg

http://www.detailingworld.co.uk/forum/showpost.php?p=2298978&postcount=678

[Frenchie]

Clean shoes !

http://farm4.static.flickr.com/3043/2924989663_e320237374_o.jpg

[Frenchie]

Poke time

http://farm4.static.flickr.com/3485/3214436582_3e6cfc7b6c_b.jpg