RNS-510 (HW version C)

[illektronik]

< post removed >

[Frenchie]

umm - what the difference between the 2 John ?

[Pharkus]

PM me John. Very interested to get this unit.

Let us know what the diff is between the B and C units. I have not been following this closely since I gave up bargaining with VW spare parts to get me one in for their prices.

I'd get it installed at my dealer. Ready for money on this right away (putting the foot down).

Damn mod fund gets hit by the surprise new mod monster again.

[mikinoz]

Make sure that there is a bit of a disclaimer about the slow battery drain issue on older CANBUS model cars - because that would be a bit of a bitch to come to your car and the battery was flat.

[Pharkus]

Make sure that there is a bit of a disclaimer about the slow battery drain issue on older CANBUS model cars - because that would be a bit of a bitch to come to your car and the battery was flat.

Care to elaborate on this and if it would affect a MY08 R32?

P.S. I'm still very interested John.

[10d]

How can you tell if the unit is an upgraded B with C firmware?

I'm interested.

[mikinoz]

I am tempted, but just committed to an RCD510... I need to get a new CANBUS Gateway for my car, so to go to any of these (510's) I am up for an additional $200, which pushes me out of the game really at the moment (with kid #4 on the way, I spose I have to keep it real).

What is the timeline for payment and delivery? Are you able to scan VAGCOM when you install (or after I install)?

Damn you for posting this!

Oh there is also the antenna problem for older models also - http://www.my-gti.com/1088/upgrading-2nd-generation-radios-rcd-300-rcd-500-to-3rd-generation-rcd-210-rcd-310-rns-310-rns-510-rcd-510-antenna-adapter

[10d]

Yours works fine Tendy. You don't need one dude. If it ain't broke, don't fix it.

You'd need to set up the set screen with VDCS so you can hold down setup and enter the menu which give you all that info. Either that, or pull out the unit and look at the part number. I can recall which bit/byye to active it. VCDS calls is a test mode. It's 51 or something from memory. It's deafult is 0 and it needs to be set to 1. You'll have to google it to get a proper run down.

It sometimes takes 30 minutes to lock on. but I guess that is just the tall buildings in the city.

Thanks bud! Don't need one then.

[Frenchie]

Thanks for the clarification...Don't need one :) Good luck gents

[Pharkus]

Ok, just got back home so reading up on those links now. When do you need a response by and tranfer of funds John?

[10d]

I could be wrong, but that's a common problem with the 510 in the city. It also gets confused quite often when in town. Y really aren't going to benefit in any way if you got a C. I should update your firmware for you though and recopy the maps next time we meet up.

Thanks bud!

[ar44]

Im interested. Just need to do a bit more reading. When do you finalise the order?

[G-rig]

Care to elaborate on this and if it would affect a MY08 R32?

P.S. I'm still very interested John.

Nah just the older 05 ones etc.



Oh there is also the antenna problem for older models also - http://www.my-gti.com/1088/upgrading-2nd-generation-radios-rcd-300-rcd-500-to-3rd-generation-rcd-210-rcd-310-rns-310-rns-510-rcd-510-antenna-adapter

That problem is fixed for $50 from the dealer ;).

[stephen8512]

dammit, should have waited for this! i bought g-rig's old B unit....havent had an issue until the terrigal cruise

For some reason, on the terrrigal cruise, just before we reached the destination, the RNS unit just gave out? I was playing music via SD card (4gig SDHC) and it just stopped. It kept resetting itself.........whenever it was reset and I could see the time on the screen, id turn it on. it would turn on but after about a minute, it would freeze whilst still playing the radio in the background. Then it would reset again and again........
unit problem?

[G-rig]

Nothing wrong with B units. Did you try and update the firmware or something?

Plenty of other people were keen on it, and I sold it pretty cheap (cost me 2k). You could have gone to the dealer and paid $3,300 if you preferred.

Never had any of those issues and used it for nearly a year. You could have got one of ebay for 1k as well, doubt youd get support for those or the one's John is getting.

Was that the only time? Anyway it's prob just a 'black spot'? Others mentioned a similar thing when driving through certain areas, why dont you see if it does it again and drive back there.

Added: try a re-boot.

[stephen8512]

Hey greg!

Dont get me wrong, I love the RNS unit and its been problem free up until taht one time.

It was just that one time. I left it off all the way back home and I didnt use the car for about a day or so......then drove around today and no errors? Maybe it was overheating or something? but even still, it should just turn off like that?

I didnt upgrade to the latest firmware YET only cuz I dont know what CANBUS model mine is. Need to vagcom it to check but havent got around to doing it yet and I need to find someone who can do it for me (find the canbus model)

It was at terrigal that it carked it. I came back to my area and sydney and no errors since?

P.S I reset it by pressing the < > buttons and the eject button and holding them down. Is that a hard reset?

[stephen8512]

Hey greg!

Dont get me wrong, I love the RNS unit and its been problem free up until taht one time.

It was just that one time. I left it off all the way back home and I didnt use the car for about a day or so......then drove around today and no errors? Maybe it was overheating or something? but even still, it should just turn off like that?

I didnt upgrade to the latest firmware YET only cuz I dont know what CANBUS model mine is. Need to vagcom it to check but havent got around to doing it yet and I need to find someone who can do it for me (find the canbus model)

It was at terrigal that it carked it. I came back to my area and sydney and no errors since?

P.S I reset it by pressing the < > buttons and the eject button and holding them down. Is that a hard reset?

[G-rig]

Hey greg!

Dont get me wrong, I love the RNS unit and its been problem free up until taht one time.

It was just that one time. I left it off all the way back home and I didnt use the car for about a day or so......then drove around today and no errors? Maybe it was overheating or something? but even still, it should just turn off like that?

I didnt upgrade to the latest firmware YET only cuz I dont know what CANBUS model mine is. Need to vagcom it to check but havent got around to doing it yet and I need to find someone who can do it for me (find the canbus model)

It was at terrigal that it carked it. I came back to my area and sydney and no errors since?

P.S I reset it by pressing the < > buttons and the eject button and holding them down. Is that a hard reset?

Yeah no dramas, just everyone's making me look like a dodgy bastard on here lately haha.

it's the <> and "i" button, i think that's what you meant. That usually fixes it if it does something odd. But maybe confirm your canbus stuff mate.

[stephen8512]

Just try doing a hard reset. Sometimes the can be a bit glitchy. Try a process of elimination. See if it happens again when not playing off the SD card. What spec is the SD card. Some of them read at different speeds.

Yeah I did a process of elimination. When it happened, i took out the SD card immediately then turned it back on after it reset itself. Then it played radio for a while then it froze again, and reset again. Then took out the CD i had in it and turned it on again after it reset itself. It froze again and again and again. So I turned it off. When it reset, i didnt turn the unit back on and on the MFD, the time would read, say, 12:50pm and so did the RNS. But when it went to 12:51pm on the MFD, the RNS stayed at 12:50pm and it reset itself again.

I turned the car off for about 20 minutes before starting up again. Then drove it all the way back home. No errors after waiting those 20 minutes. And when I started the car up today and drove arond (drove for most of the day today), no errors.

[stephen8512]

Yeah no dramas, just everyone's making me look like a dodgy bastard on here lately haha.

it's the <> and "i" button, i think that's what you meant. That usually fixes it if it does something odd. But maybe confirm your canbus stuff mate.

Hahaha well I can vouch for ya mate. The unit came to me in perfect nick and packaged nice and snug as well.

Yeah will need to get that confirmed. I might get Derek @ EA to do it when I go for my mini service (oil/filter change) next week....

P.S When you had your RNS in your R32, how many sattelites would lock on? Sometimes it takes a LONG time for the sattellites to lock on for me (i'm talking 10-15 minutes sometimes?) It usually identifies about 10-12 sats, but it stays on 0/12 NO FIX for a while......then I get 1 or 2.......then 3 then 4 (2D FIX) and then eventually 5-6 (3D FIX). but most ive ever got was maybe a 5-6/11 sats locked in?

[stephen8512]

Yeah no dramas, just everyone's making me look like a dodgy bastard on here lately haha.

it's the <> and "i" button, i think that's what you meant. That usually fixes it if it does something odd. But maybe confirm your canbus stuff mate.

Hahaha well I can vouch for ya mate. The unit came to me in perfect nick and packaged nice and snug as well.

Yeah will need to get that confirmed. I might get Derek @ EA to do it when I go for my mini service (oil/filter change) next week....

P.S When you had your RNS in your R32, how many sattelites would lock on? Sometimes it takes a LONG time for the sattellites to lock on for me? It usually identifies about 10-12 sats, but it stays on 0/12 NO FIX for a while......then I get 1 or 2.......then 3 then 4 (2D FIX) and then eventually 5-6 (3D FIX). but most ive ever got was maybe a 5-6/11 sats locked in?

[G-rig]

P.S When you had your RNS in your R32, how many sattelites would lock on? Sometimes it takes a LONG time for the sattellites to lock on for me? It usually identifies about 10-12 sats, but it stays on 0/12 NO FIX for a while......then I get 1 or 2.......then 3 then 4 (2D FIX) and then eventually 5-6 (3D FIX). but most ive ever got was maybe a 5-6/11 sats locked in?

Usually got 5 or 7 satellites etc, can't remember but i think you get less for a 3d fix. Definitely didn't take long at all maybe 30s - 1 min max. Could be all the buildings down there?

[Pharkus]

Hi John

Just to point out it's Pharkus with a "ph". Lemme know once you get firm cost, but yet I am committed for the 600 poundish price. Also will be expecting a little on top for shipping?

Also thanks to the other guys so far for clarifying the technical bits for me. I just want to lay down the cash for this and have it installed at the dealer. More bling for the cabin!

[chris32]

Hey greg!

Dont get me wrong, I love the RNS unit and its been problem free up until taht one time.

It was just that one time. I left it off all the way back home and I didnt use the car for about a day or so......then drove around today and no errors? Maybe it was overheating or something? but even still, it should just turn off like that?

I didnt upgrade to the latest firmware YET only cuz I dont know what CANBUS model mine is. Need to vagcom it to check but havent got around to doing it yet and I need to find someone who can do it for me (find the canbus model)

It was at terrigal that it carked it. I came back to my area and sydney and no errors since?

P.S I reset it by pressing the < > buttons and the eject button and holding them down. Is that a hard reset?

There is a known fault with the rns510 around the wyong area, theres a couple of threads on it on watercooled. People describing the same things, rns reseting itself etc.

Here's a few links:
One (http://www.vwwatercooled.org.au/newforum/upload/showthread.php?t=38119&highlight=Kloster)
Two (http://www.vwwatercooled.org.au/newforum/upload/showthread.php?t=26803&highlight=rns+crash)

It looks like in the end Kloster VW Newcastle updated something (the maps?) to fix the units.

[G-rig]

Should just move up here :).

My steering wheel controls would be real laggy once or twice but a reboot fixes it.

[Pharkus]

I think I would be more comfortable with a 1 year warranty one John, put my name next to one of those please. Also are they refurbished units as well?

[mikinoz]

Are you able to elaborate on the differences between the part codes John?

[S&H]

I've asked all the relevant questions of my contact and will post up answers to them once I've got them.

No money will be necessary till things are more set in stone and we know what time frames we're looking at.

So I'm going put put down:

01. Parkus
02. Possible buyer pending more info, name withheld for now
03. Possible buyer pending more info, name withheld for now.

That leaves room for 1, which he might be able to fill as he's about to post it up on other forums himself.

Will update as soon as I have some more info at hand. Please be patient.

Hi John,
Count me in for now pending more info and total cost
rgds
Shannon

[mikinoz]

I think video in motion could be the deal sealer on that front (for the kiddies). With the added extra warranty, 200 more clams is not heaps of difference.

[Pharkus]

Ruh Roh....just read up on some of the posts on watercooled with G-rig and others comments on upgrading the rest of the audio system. Thought I would never do it again but with the new unit who knows.

[Pharkus]

I mean looking at upgrading for 3 ways up front, new amp, maybe subbie if it doesn't compromise rear boot space. After purchasing the RNS510...

[Pharkus]

I probably only spent about $3k on my Holden Astra getting some MB Quart front splits, JL Audio 4 channel amp, JL Audio sub and what I thought was a nice top of the line JVC headunit (will try to find pics later) Did that on a university budget but back in my early 20's the sound was pretty good pumping out tunes at high sound quality volume. Nowadays, I find other ways to drain the bank account and with the wifey riding shotgun can't have the volume up to the limits like I used to. Put on top of that the fact a car will never be the ideal environment from an SQ setup I would probably prefer to spend the extra dosh on upgrading my home cinema and stereo sound system at home (not that that project will get off the ground either!).

I still have the next 6-7 years to do this so slowly does it I guess. Been following your audio upgrade thread John and that looks pretty mint for the install.

*Sorry to derail this thread. Who else is interested in these units???

[S&H]

Sorry John,

I'm out now...the Minister of Finance has put the Kybosh on it. :(

[nath_mk6]

Sorry John,

I'm out now...the Minister of Finance has put the Kybosh on it. :(
Lol that's War & Finance! And I feel your pain...

[Pharkus]

I got around the Minister for War and Finance by way of insertion of a covert asset team for reconaissance and execution of project Wayfinder. BTW telling the Minister that she may never have to get dizzy reading the Melways again also helped the cause.

[S&H]

I got around the Minister for War and Finance by way of insertion of a covert asset team for reconaissance and execution of project Wayfinder. BTW telling the Minister that she may never have to get dizzy reading the Melways again also helped the cause.

Can't use that excuse. We already have a Portable Garmin GPS.

[Pharkus]

Can't use that excuse. We already have a Portable Garmin GPS.

What if that happens to be lost for a few weeks?

[S&H]

What if that happens to be lost for a few weeks?

LOL - good idea. But SWMBO will not be fooled....trust me.

[Pharkus]

LOL - good idea. But SWMBO will not be fooled....trust me.

Only trying to help you here. Need a more plausible story? Maybe you can get the missus to read the Melways whilst you are driving, get her to feel nauseous, then ask at that time.

@John - Eagerly awaiting your PM mate =)

[chris32]

John,
With the 1T0035680C units would you be able to order one for me a few months down the track? I want to pick one up for my father for his birthday but would need to get some money together first. Also with the built in video in motion does that effect our reversing camera? I was under the impression we couldn't have both, but hopefully i'm wrong. As I would want to put the C unit in my car and give him the B unit. :)

Thanks mate

[chris32]

I'll try to find where I read it, but I probably have it wrong, I think what it was is the kufatec video in motion adapter plugs into where our rvc does, i've never had a look at the back of the unit to confirm and it might not affect these units if video in motion its built in. Mav would know, as he had the video in motion (which I remember he had up for sale after upgrading to the oem rvc).

[chris32]

Sweet, I was hoping I miss read it.

£800 fine with me i'll let you know when i'm ready to go ahead but i'll be a couple of months, as his birthday isn't till september.

Thanks for organising this John.

[GTom]

When are you planning on getting them?

[Pharkus]

Still sitting here with my hand in the air John! PM me once he is ready to transact. Got the local dealership ready on stand by for installation.

[kao7ik]

Are you able to install these units as well? Im looking at getting one in the next few months. PM me with details thanks

[mikinoz]

Intallation is pretty straightforward, but I need to check if there is any vagcom work required after it has been put in.

If there is no vagcom work, I'm happy to help someone with their install.

Can someone confirm what, if any, coding is required via vagcom?

[Ankush]

Am definately interested in getting one, but as I currebtly have a RCD 510 will have to connect an antenna too.

John please count me in for the next shipment.

[SUGA]

What's the latest update on this? I'm in!

[benough]

Yo John. What's the cut off on this? I know someone who may be interested.

[Pharkus]

It's all moving very slowly though.

Just gives me more time to give my bank account a bit of a breather.

[mshl1979]

Intallation is pretty straightforward, but I need to check if there is any vagcom work required after it has been put in.

If there is no vagcom work, I'm happy to help someone with their install.

Can someone confirm what, if any, coding is required via vagcom?

Yeah I believe some VAGCOM work is required. The unit would work flawlessly but you don't get NAV directions in the MDI and also you lose the music navigation in the MDI. You need to tell the car with vagcom that you have the rns installed.

[kao7ik]

I will be interested in these units but it will have to be in a couple of months. Hopefully you can still get them by that time

[PASHN8]

Hey John, so is the price still 610pound all incl as per the first post?

[simonr]

So im getting a GTi with a RCD510 at the start of may.. so looking into getting a 510..


Yeah I believe some VAGCOM work is required. The unit would work flawlessly but you don't get NAV directions in the MDI and also you lose the music navigation in the MDI. You need to tell the car with vagcom that you have the rns installed.

can you explain "NAV directions in the MDI and also you lose the music navigation in the MDI."?

and whats the process of "You need to tell the car with vagcom that you have the rns installed" ? this done through the unit itself right?,

Is there a good instruction list somewhere?

[mshl1979]

So im getting a GTi with a RCD510 at the start of may.. so looking into getting a 510..



can you explain "NAV directions in the MDI and also you lose the music navigation in the MDI."?

and whats the process of "You need to tell the car with vagcom that you have the rns installed" ? this done through the unit itself right?,

Is there a good instruction list somewhere?

The MDI is the little screen between the rev counter and the speedometer. Hope that clears things up. You can no longer change tracks with the steering wheel buttons.

VAGCOM or VCDS is the software you can purchase online www.ross-tech.com which includes a cable that you plug into your notebook and into the car that allows you to modify the settings.

[DeanCorp]

The MDI is the little screen between the rev counter and the speedometer. Hope that clears things up.
That little screen is actually the MFD the MDI is the little box in the glove box for linking your iPod to your RNS510 for playback and charging giving you full access to the iPod from the RNS510.

[PASHN8]

Ah ok, so around $1320AUS all up :) when do you cut off the buy and place the order?

[Pharkus]

Let me know when you need the money by John.

[mshl1979]

That little screen is actually the MFD the MDI is the little box in the glove box for linking your iPod to your RNS510 for playback and charging giving you full access to the iPod from the RNS510.

What he said.... not good with acrynoums... what does GTI stand for again?

[S&H]

What he said.... not good with acrynoums... what does GTI stand for again?

Doesn't GTI stand for Grand Tourer/touring (fuel) Injected?

[mshl1979]

What he said.... not good with acrynoums... what does GTI stand for again?

http://farm5.static.flickr.com/4011/4518882711_d8d4950354.jpg

That is what i'm talking about. Without VAGCOM you won't get the compass and directions/streenames on the MFD screen

[mikinoz]

I wish I had a highline MFD :(

[kao7ik]

Just some information that i found. Feel free to comment and clarify if this info is correct for installation/upgrade to the RNS 510 unit.

The radio antenna jacks in this unit are very close together, which requires a new dual antenna cable jack plug to be used instead of the existing individual connectors. You will require the following VW parts:

1 x twin connector : P/N 4E0 035 608 K
2 x antenna adapter : P/N 000 098 707

If you have a 6 stacker, you will need to swap the pins on the RNS-510;

- Switch AUX and CD Changer grounds pin positions (Pins 2 and 3 in red) as per http://img233.imageshack.us/my.php?image=img40412rg2.jpg

General removal of head unit: http://forums.vwvortex.com/zerothread?id=3121070

You will most likely need a Can Bus Adapter from the following website if your car is pre-2008. http://kufatec.com/index.php?main_page=product_info&cPath=5_20&products_id=364&zenid=f28d47a592a22544f911f75d9fdab9f3

You will need also need Vag-Com coding or VCDS coding (same thing, different names).

[G-rig]

The radio antenna jacks in this unit are very close together, which requires a new dual antenna cable jack plug to be used instead of the existing individual connectors. You will require the following VW parts:

1 x twin connector : P/N 4E0 035 608 K
2 x antenna adapter : P/N 000 098 707


People that are upgrading from 2nd gen head unit only need this part #: 7L6 051 551 (about $50 from the dealer).

Looks like this:
http://www.my-gti.com/wp-content/uploads/antenna_7L6051551_1-300x86.gif

Newer cars that came with RCD510 etc wont need an adapter.

Refer to Mav's site:

Upgrading 2nd generation radios (RCD 300, RCD 500) to 3rd generation (RCD 210, RCD 310, RNS 310, RNS 510, RCD 510) antenna adapter (http://www.my-gti.com/1088/upgrading-2nd-generation-radios-rcd-300-rcd-500-to-3rd-generation-rcd-210-rcd-310-rns-310-rns-510-rcd-510-antenna-adapter)

[mikinoz]

The alternative to the Kauftec is to get a later model CANBUS gateway and then coded.

I am unsure if it affects all cars pre 2008, the battery drain issue that is.

You can also get the antenna adaptor for about $30 from eBay.

[entice]

Hi I am interested in one of tehse.

Just a few q's.

I'm expecting my GTI mid next week. 2010 build.
I assume no further parts are required,
Ie, I will not need an antenna adapter,
and I will not need a GPS antenna.

Further, are maps for AUS supplied?

I am happy to do the install myself, but my car will have a Fiscon BT unit, and ParkAssist with RVC. will these still function?

Also, is tehre someone in Melb who can be kind enough to lend a hand with VAG Com?

Is there an all up price for all this yet?

Many thanks in advance...

(it's either this, or a refurb'd ebay unit)

[mikinoz]

I have installed an RCD510 to be my test mule so there are no issues when the RNS arrives. Seems I have the older version CANBUS gateway, so I am will be buying a new version from the Czech Republic.

I'm shouting out to see if there is anyone else that is going to need to get one so they may like to piggy back on my order for a group buy to combine shipping.

PM me if you want one, I will out the link and price in here once I have located the item online.

[G-rig]

What are you planning to do about the customs tax illektronic? I woudlnt mind getting another one sometime if there is a second round.

[PASHN8]

What G-Rig said :)

[mikinoz]

I have installed an RCD510 to be my test mule so there are no issues when the RNS arrives. Seems I have the older version CANBUS gateway, so I am will be buying a new version from the Czech Republic.

I'm shouting out to see if there is anyone else that is going to need to get one so they may like to piggy back on my order for a group buy to combine shipping.

PM me if you want one, I will out the link and price in here once I have located the item online.

1K0 907 530AD - $131 landed. I'm ordering tonight if you want one.

[WingnutR32]

1K0 907 530AD - $131 landed. I'm ordering tonight if you want one.

I'm interested!!! *waves hand frantically*

[mikinoz]

I'm interested!!! *waves hand frantically*

Well that is 2 of you - anyone else?

Please send me a PM so I have your details.

I may buy 2 extra, but they will have an additional margin added on to them as they were not prepaid.

[Ankush]

John any idea as to when would we be expecting the shipment.

[WingnutR32]

mikinoz,

PM sent, sorry, not sure what details you are after exactly.

---------

illektronik, as G-rig asked, what's the go with customs? Very interested in getting this unit, but would like a final 'landed to my door' price that entails the customs duty if there is any involved.

Cheers
Sam

[G-rig]

Is Tommy still on the scene, that could still work out cheaper? as there is generally no customs tax.

[Pharkus]

Well it's been a bit problematic. The suppliers contact only had the 1 C unit, even though I was lead to believe he had several. My supplier is now trying to find a source for the units via his other contact. It's all gone a bit shit, but will see how it pans out.

Happy to wait mate. We all appreciate the efforts you are going through for this. But do let us know if this becomes a problem or if there are any super long delays. Nothing bad about the funds sitting in the offset against the mortgage =)

[JohnA]

Not wanting to start a new thread, just wondering if anyone in Melbourne with VAG COM is willing to help us without with the coding.
Happy to pay for the service.

I am also happy to install the units into any ones car here in Melbourne.

[WingnutR32]

Thanks for the reply in the PM John.

1. Pharkus
2. mikinoz
3. Ankush
4. Suga
5. GTI Cam
6. ar44
7. chris32
8. W1ngnut

Cheers
Sam

[G-rig]

so is it approx. 800 pounds still (~$1320)?

[G-rig]

Thanks mate I may have to get one too, need to sell the bitone first, or rob a bank for all the new mods.

[G-rig]

Yeah given the mk6 only has 2-ways and they are in better locations I'm not convinced I need it or all the extra cabling as I still want to keep everything hidden.

Don't want to stuff you around either so depends when the deal goes down (ie 2 weeks would be fine).

[mikinoz]

I am ordering the Gateways first thing tomorrow. I have contacted those interested to confirm - if you want to get on the order late email me michael '@' macsalesguy.com

[chris32]

1. Pharkus
2. mikinoz
3. Ankush
4. Suga
5. GTI Cam
6. ar44
7. W1ngnut
8. G-rig

Sorry John as per my original post I wont have the money together for this for a few months, hopefully you can still get a good deal on them then. :(

PS. Your inbox is full.

[GTI Cam]

John these units still have the 12 months warranty on them

[G-rig]

Maybe leave me off the list for now John, cheers

[JohnA]

Not wanting to start a new thread, just wondering if anyone in Melbourne with VAG COM is willing to help us without with the coding.
Happy to pay for the service.

I am also happy to install the units into any ones car here in Melbourne.


don't worry about it, have decided i will just get my own vag com instead

[mikinoz]

I have 5 later model gateways coming, 3 for committed orders and 2 spares that will be for sale to anyone that needs, $150 a piece.

[WingnutR32]

I have 5 later model gateways coming, 3 for committed orders and 2 spares that will be for sale to anyone that needs, $150 a piece.

Thanks for organising that mikinoz!

I have my dealer in Canberra all lined up with job number and everything ready to install the new RNS 510 + Can Bus Gateway (including all coding). *BIG GRIN*

[mikinoz]

6-8 days from now ex Czech for the gateways.

[mikinoz]

Ok so 4/5 gateways are spoken for. Now all I need is confirmation on when the RNS deal is due to go down and I'm sweet!

[WingnutR32]

Ok so 4/5 gateways are spoken for. Now all I need is confirmation on when the RNS deal is due to go down and I'm sweet!

Exactly, can't wait! Keen as a bean to get it all installed!

[mikinoz]

Quick update, currently all of the Gateways are now spoken for...

[kaan]

1. Pharkus
2. mikinoz
3. Ankush
4. Suga
5. GTI Cam
6. ar44
7. chris32
8. W1ngnut
9. G-rig
10.kaan

[mikinoz]

Any more details on this? I'm keen to move shortly with it...

[bigwill]

im also very keen john :D im a definite if its still going ahead.

1. Pharkus
2. mikinoz
3. Ankush
4. Suga
5. GTI Cam
6. ar44
7. chris32
8. W1ngnut
9. G-rig
10.kaan
11. bigwill

[WingnutR32]

Thanks for the update John.. Checking out fees and all with customs, it actually isn't that much of a cost if it is deemed neccessary. I think it was an extra $200 to customs.

[mikinoz]

Thanks for bearing with me on this. Will have more info shortly.

I am also calling this to a close. There are 10 names there, and unless someone pulls out, there won't be any more orders. I can put you in touch with the contact if you wish, or there is always Tommy, or local distributors.

all your effort is appreciated!

[kaan]

thanks mate i appreciated!

[G-rig]

Sounds like it snuck through but sometimes the courier company forward you a bill a few weeks later - hopefully they won't though.

Either way anything under 2k is quite good for one of these units.

[WingnutR32]

Exactly what I was thinking G-rig, under $2K is great. And as I said, at the current price, customs duty is about $200 i think.

I've just never dealt with customs before so no idea on how to get items over $999, a workmate said I would have to pre-warn customs to be expecting something.

[mikinoz]

They won't all be going to the same address, so I cannot see that there will be an issue.

The displayed value if it is about $US700 means that customs should not even bother about it.

Excited to hear when you have yours in!!

[G-rig]

Aren't they 800 pounds though? What is the latest price?

Hopefully they will sneak under the radar.

[mikinoz]

Updated CANBUS Gateways arrived today, I will contact those who ordered by PM.

[mikinoz]

Who is going to give me a hand recoding my CANBUS now I have it, or should I call Derek or similar to do it for me?

[YouSnooze]

You can borrow my VCDS anytime if you like.

[mikinoz]

I'll tee a time up to call past and drop your canbus off and we can discuss it. PM me your phone number.

[mikinoz]

I hate to pester but is there any feedback from the unit that you received and any idea on how we are planning to proceed with the purchases (if at all)? Cheers!

[SUGA]

Yes updates please! :)

[WingnutR32]

Thanks for the update John.

Extra $$ for local warranty isn't such a bad thing!

[Pharkus]

Still here John and thanks for the continuing efforts mate. I has the golds stashed in my lair ready for epic upgrades still. I will have limited contact over the next week or so but will check in as much as I can if there is movement on this.

[G-rig]

I emailed Tommy the other day and he said he still sells them for 1000 euro delivered, and last time i didn't encounter any customs tax as they weren't marked as full price. They could be 'second hand' as far as customs are concerned. He said the last ones were Rev C too. John let me know if u want the email address.

Just another option but 800 pounds plus the customs tax doesn't work out any cheaper and people could order separately.

You can also get them on eBay for 1100$ but would be more dodgy/risky IMO.

[GTI Cam]

Thanks for all your efforts John, are you contactin Derek @EA as the local supplier

[kaan]

1. [ ] Pharkus
2. [ ] mikinoz
3. [ ] Ankush
4. [ ] Suga
5. [ ] GTI Cam
6. [ ] ar44
7. [ ] W1ngnut
8. [x ] kaan (received PM,payment pending)
9. [ ] bigwill
10. [x] murky (received PM, payment pending)

[WingnutR32]

Thanks for all your efforts on this John! I'm sure everyone involved is highly appreciative of everything you have done.

PM sent for a yes for me.

[mikinoz]

I have to say so far all if the interactions have been prompt and tip top!

[G-rig]

Great work John, that's certainly enticing. Wonder what the difference between refurbed and new/stolen is?
Need more cash haha.

[YouSnooze]

I'll take Suga's vacant spot John. PM sent.

[mikinoz]

So a lot of information is contained locally, here is the instruction so you can upgrade your Can Bus coding with VCDS (thanks to Matt at my-gti.com) http://www.my-gti.com/2296

[YouSnooze]

I know someone PM'd me after I'd got the original list of 10. I had to clear out my inbox, so I can't recall who it was
That latecomer was me.

[GTI Cam]

John I am in but I need you to clear your email box as its saying its full

[WingnutR32]

Tracking number received from seller :D

[Ankush]

Thats great, hopefully i will get mine today too.

[SR32]

Nah. Wasn't you D. I'd remember if it was you. :)

Someone else sent me a PM about it a few days ago. Oh well, they'll surface in time I guess.


Hi mate,

That was probably me! But I bit the bullet and already purchased a Vers C Refurbed RNS510 unit from Ebay with 12 month warranty.

Delivered within 2 days (TNT express) and installed over the weekend. AMAZING unit, nil scratches, completely unmarked! Detects satellites INSTANTLY. Haven't played around with the HDD, SD cards etc. as I have to get the Vagcom codes changed for the factory amplifier......

Steve

[mikinoz]

No one tell Fiona - she does not know I have bought it ;)

[G-rig]

Are those all spoken for mate?

[Ankush]

It's also a good time to pay as A$ has risen compared to last week.

[G-rig]

Just wondering what is meant by 'refurbished' and why they would be refurb units? They should be good for that price though if they are 'as new' condition.

[Ankush]

Hopefully the units will all be great, just curious as to the warranty process, how would that work?

any ideas?

[mikinoz]

John is personally underwriting the warranty on mine. I have a contract signed in blood! :)

seriously though, you'd gave to send it back.

[GTI Cam]

mick your mailbox is full just tried to send you a message

[mikinoz]

I'm sure refurb is fine.

Inbox cleared.

[SUGA]

Thanks John!!

[Ankush]

thanks John for all the help.

what firmware did the unit come with?

[mikinoz]

Great news thanks for the update John.

[Pharkus]

I'm onto it John, just need to get myself organised coming back from HK. Will either be Monday latest for setting up Paypal account and payment, hope that is ok? Just trying to get my feet back under me.

[Ankush]

How are people going abouts with the tracking of this, have tried looking but the site is quite light on info.

maybe its just me.

[WingnutR32]

As far as I can tell, mine says that it is bound for a flight to 'SIDNEY'...

[Ankush]

No panic John just was curious. Thanks for looking into it though.

I looked into it further and can see delivery to Germany, but that's it.

[WingnutR32]

Trace of mine:http://img52.imageshack.us/img52/9816/worktracerns510.th.jpg (http://img52.imageshack.us/i/worktracerns510.jpg/)

"Planned for 'Sidney'"

[WingnutR32]

John, was able to get the trace happening from the following link:
http://trace.post.lt/

Once the page loaded, I clicked on the "Lietuva" Track and Trace on the left.

Then you can enter you details in and hit enter.

[Pharkus]

What a rush, got back and instead of the wife asking me for money for another hand bag it's John!! (I kid)

Thanks again for the organisation of this group buy mate.

[Pharkus]

Ahahah too funny, though I probably coulda picked one up for you cheap at the markets had I known!

[mikinoz]

Mine has been stationary/not scanned in a few days;

Siuntos Nr: CV400011021LT

Įvykis Vieta Data ir Laikas
Priimta pašte 92001 2010-05-10 15:14
Gauta siuntimo apkaitos vietoje Rodunios kelias 9,Vilnus,LITHUANIA 2010-05-11 21:38
Išsiųsta iš siuntimo apkaitos vietos Rodunios kelias 9,Vilnus,LITHUANIA 2010-05-12 19:17

[mikinoz]

Looks like it arrived, best send the little lady to the post office at lunchtime tomorrow.

[mikinoz]

I love logistics, it amazes me what they manage to do these days. Thanks John.

[nath_mk6]

lol if you love logisitcs then maybe you can fix my current headache, disposing of 1.4million stock items..... argh

[mikinoz]

PM me if you want my uber advice. haha.

[WingnutR32]

Can't find much on the translation of 'apkaitos', however, the Lithuanian translation of 'apskaitos' is "Accounting"

[mikinoz]

lol if you love logisitcs then maybe you can fix my current headache, disposing of 1.4million stock items..... argh

That mean you've done 1.4 million mods to get those stock items off the gti? :)

[mortygttdi]

Hi John Darren here I just wanted to apologize to all your customers regards me backing out...It would have ended up costing you lot far too much money for me to send them out for you, John was fantastic as where you lot been so patient.

Nice to see you got sorted John, hows the car coming along not had many update on the mk5golfgti.co.uk forum from you lately.

Cheers

Darren

[10d]

Good to see your car back on the road again, J. You like the new stoppers? How's the diff?

[10d]

Yep, that is funny. The only difference we had was the DV. I'm running the new OEM piston type.

[G-rig]

Yeah. It's all good except for that intake. Amazing you never found fault with it. But that's another story. :)

What intake are you going to try next mate? Those Forge twintakes just look like clever marketing because they are different. They still merge back into one pipe anyway. (IMO)

[saad]

They do merge into one pipe, but it has to other wise the MAF will go all whack on you. Having the two filters allow for larger surface area and a larger chamber for air

[G-rig]

He knows that much saad. Everyone does. Dropping from a 101mm to a 64mm just before the turbo just adds additional turbulence, potentially causing more issues, and this is all post MAF readings. It's about the tune and the intake being perfectly matched and coded appropriately.

Anyway, I've taken this thread OT far enough.

Sorry for the off topic too John, hope you get it sorted soon, sounds like a bit of experimenting is needed. I assume there aren't that many people with APR and twintakes yet and sounds a bit more complicated than I gave credit for.

[shauno]

So to slightly hijack this thread, apart from the RNS510, what's the best headunit replacement for under $1k?

I need something with a better iPod input... not sure which RCD headunit I've currently got, but it's got the in-dash CD stacker.

EDIT: hmm, maybe it's this problem - Auxiliary-input-audio-sound-quality-problems-after-changing-head-unit (http://www.my-gti.com/1328/auxiliary-input-audio-sound-quality-problems-after-changing-head-unit)

[kao7ik]

sorry to hijak your thread but for those who need an updated canbus for the rns install, ive got a spare one, version L part # 1ko....530L. pm if needed

[mikinoz]

Went to the post office on the off chance today and found nothing there sadly.

I was not bothered, but am getting a little excited about pulling the car apart again now.

[Pharkus]

Hopefully it won't be too long. I, and many of us here, know the feeling. ;)

Any news on my tracking number yet John?

I seem to have:
-stuff bought from US on return trip back by ship due to wrong address on my part
-need to confirm return of another purchase cos of incorrect items posted to me
-still waiting for autographed book from US that I ordered early in April

Funny if the RNS comes in before them all.

[simonr]

i got an email back from paypal with my tracking number..

The item is currently "Done at the post office " (with google translation)

I found some awesome How tos if anyone is interested

http://www.golfgtiforum.co.uk/index.php?topic=152441.0

http://vwnavi.com/showthread.php/13574-DIY-install-rcd-510-to-RNS-510-on-2010-CC

http://www.youtube.com/watch?v=cpdnnNw4wlc

My Mk6 gti arrives get delivered (hopefully) on the weekend..

I have a few questions

-Has anyone got a good tutorial on how to work the VAGCOM? anyone in sydney with one that would like to set my RNS510 up when its in?

-Im getting the basic bluetooth from the factory, will this work with the voice control on the new firmware on the RNS510?

-In one of the tutorials i have seen it says the RCD 510 has a positioning sensor which is not needed in the RNS510, and therefore needs to be disconnected.. does anyone know what this is? what is does? why you dont need it?

[GTI Cam]

No tracking number for me at this stage John

[Pharkus]

I've got tracking number now John, Thanks.

Also sent you an e-mail to your address, please call me with regards to the "gift"

[Ankush]

Sekimas ir paieška

Paslauga: Parcels Siunta: CN705891952LT

Įvykio kodas Vietovė Faktinis laikas Būsena Daugiau
Posted 04001 05/12/2010 14:38 Completed
Gauta siuntimo apkaitos vietoje Rodunios kelias 9,Vilnus,LITHUANIA 05/12/2010 20:51 Completed
Išsiųsta iš siuntimo apkaitos vietos Rodunios kelias 9,Vilnus,LITHUANIA 05/13/2010 20:04 Completed
Gauta gavimo apkaitos vietoje CAYTOA, ,CANADA 05/18/2010 17:23 Completed
Pateikimas muitinei CAYTOA, ,CANADA 05/18/2010 17:23 Completed
Įteikta CA 05/18/2010 17:23 Planned

Papildoma informacija
Siuntos duomenys Rūšis Daugiau
BT350:100513 The flight on which the mail left
LTVNOACAYTOAACN00073 Shipment containing your mail
LTVNOACAYTOAACN00073001100071 Receptacle
CN705891952LT Item

Korespondencija
Užklausimo data Siuntėjas Gavėjas Tekstas Daugiau


Thats what i wasa refferring to the other day, mine says it has reached canada and will leave on 18/05 Candian time.

[mortygttdi]

-In one of the tutorials i have seen it says the RCD 510 has a positioning sensor which is not needed in the RNS510, and therefore needs to be disconnected.. does anyone know what this is? what is does? why you dont need it?

This could be due to the 6 disc changer in the RCD? if you had the unit out and for some reason still plugged in and turned on the positioning sensor would stop the disk changer mechanism from being damaged? in the RNS510 it only has one drive so doesn't need the sensor.

Although the RNS510 does have a giro/compass inside it.

Darren

[Ankush]

John

The tracking number is right, its just that when u click on the below route links it gives further info in realtion to the route. For me it first landed in Germany and now in Canada with the next destination Sydney.

The route was there before it just gets updated with time and the green completed sign.
Hope this helps other people tracking their units.

Also if anyone form Sydney wanna do a group install that would be great.

[murky]

Also if anyone form Sydney wanna do a group install that would be great.
Sounds like a great idea - count me in!

[WingnutR32]

!!!UPDATE!!!

Tracking says my item has arrived in "Sidney" @ 13:12 today.

[kaan]

group install I am in

[kaan]

Tracking says my item has arrived so whats next?

[mikinoz]

You pick it up? :D

[mikinoz]

I'm not 100% for Sunday yet. But if I can finish painting the kitchen today I'm a good chance to be there in the mk1 for an hour or so.

Considering it says the parcel is delivered, I'm wondering if the post office have sorted it. I don't want to drive 45 min to the post office and not actually get it! :)

[simonr]

I'd be in for a group install.. except my RNS510 hasn't come yet... well neither has my golf (hopefully both come next week)..

[Ankush]

Mine says it's in Sydney too, so hopefully will get it on Monday. Anyone has v3 maps yet ?

[WingnutR32]

Dad has informed me that my headunit has arrived at home

[mikinoz]

Dad has informed me that my headunit has arrived at home

You make me feel old, haha!

[WingnutR32]

You make me feel old, haha!

Haha, if I could afford to move out, I would!

[Ankush]

Got mine too , looks good & nicely packed. May install in the evening and will post back.

[murky]

Yay. Mine turned up too. Looks like the real thing :-)

Might try installing tonight - from what I have read, it will work sans console display and steering controls at this stage. Will look at the final programming later in the week.

[Pharkus]

It might look like the real thing, but I had each on stripped out and had a Commodore 64 put inside!

They're the real deal guys. Glad they're all coming through. You should all receive something else in the mail in a day or two.

It would be even more epic with a Commodore 64 inside. Wizard of Wor?

[kaan]

i receive today as well looks nice

[mikinoz]

Shout out to Doug who has been quite helpful in the use of his VDCS skills in replacing the CANBUS today (nice to meet a local dubber too)!

Not sure if there is enough motivation to install the RNS in the dark, I might try that out tomorrow (or when the other item arrives).

And Doug, you need to remember;

CMD-Shift-3
CMD-Shift-4
CMD-Shift-4-Space
CMD-TAB
CMD-TAB-Space

[YouSnooze]

Thanks mate! Nice to meet you guys too :)

[murky]

OK - unit in.
Stuck the GPS receiver up under the plastic of the dashboard by removing the top air vents (tricky to tell just how hard to yank that thing!).
Anyway, too late to tool around with manual - but I have:

all audio working
navigation - GPS coords don't change ATM - can't tell if this is due to limited satellites or wrong maps - I was hoping for it to at least find my position.
a clock! (The RCD unit didn't have one of those :-) )


Also installed Bluefin tonight - they arrived on the same day - although it is a bit wet and a bit late to see how much of a difference it makes.

[G-rig]

navigation - GPS coords don't change ATM - can't tell if this is due to limited satellites or wrong maps - I was hoping for it to at least find my position.
a clock! (The RCD unit didn't have one of those :-) )
[/LIST]

Also installed Bluefin tonight - they arrived on the same day - although it is a bit wet and a bit late to see how much of a difference it makes.

Sounds like an exciting day!

I think you need to go for a drive the first time and nav will start working. I got a white background the first time but it comes good.

[Ankush]

Did the install too, bur am not able to load the maps at all and so cannot change the language. Any ideas ?

[SUGA]

Mine should be here soon too! Can't wait!

[mikinoz]

So I have also got the unit in. I have had a play with the VCDS but obviously I need maps for AU.

The only question I have is about the satellites, I only get between 1 and 4. The location of the GPS antenna is probably poor - where is it suggested?

I am unsure if I have made a mistake somewhere as I get a CANBUS fault incorrectly coded when I scan, so I am really unsure of where I have gone wrong. May have to get some professional help from Captn Snooze.

Only took an hour in a relaxed manner.

[murky]

Sounds like an exciting day!

I think you need to go for a drive the first time and nav will start working. I got a white background the first time but it comes good.

Yes - it started working on the second drive - about 10 minutes.
Needed about 4 satellites before it got a position.

[murky]

The location of the GPS antenna is probably poor - where is it suggested?.

This video http://www.youtube.com/watch?v=cpdnnNw4wlc at about 1:25 shows the best spot.

[murky]

Righto, I have the system pretty much up and running, albeit without Aust maps.
I don't suppose anyone living near Sydney's Inner West would be able to give me a hand with the VCDS configuration in the not-too-distant future?

[YouSnooze]

Would I need the antenna adapter if I'm going from a MFD2 sat-nav that works perfectly?? [Originally a RCD500]

[G-rig]

Would I need the antenna adapter if I'm going from a MFD2 sat-nav that works perfectly?? [Originally a RCD500]

Do you mean AM/FM antenna adapter or GPS one?

The GPS connector should be the same for both (the RNS510 should come with one) so assume you mean AM/FM adapter - I think you need to as MFD2 is still a 2nd generation head unit (but isn't listed on Mav's site).

http://www.my-gti.com/1088/upgrading-2nd-generation-radios-rcd-300-rcd-500-to-3rd-generation-rcd-210-rcd-310-rns-310-rns-510-rcd-510-antenna-adapter

[mikinoz]

Yeah. Your unit is series 1 (300/500) and these newer ones (310/510) have 2 antenna ports on them so the adaptor is required.

[WingnutR32]

Yep, going from an MFD2 myself and have ordered the adaptor. About $50 from a dealer.

[mikinoz]

Notice that I need to do some more coding with the new canbus. Seems the boot does not unlock when the key is removed from the ignition. WEIRD.

I love this VCDS - so much to play with

[G-rig]

I love this VCDS - so much to play with

It's pretty good, someone has loaned me an ebay VCDS cable and been playing around.

Last weekend I activated:
- rain closing (as per Steve's thread, thanks)
- emergency brake flash
- teardrop last wipe function (after using the window washer 5 sec later does a single wipe). - only seems to work on the rear wiper.

Also have enabled:
- fog light cornering
- Instrument needle sweep ie 'staging' (build 09 week 45+ only)

Was thinking about turning the seatbelt chime off and lowbeams as DRL's but not sure yet.

Seems the boot does not unlock when the key is removed from the ignition. WEIRD.

Mine didn't open the boot originally either, seem that with some functions on the MFD you have to untick it and tick it again for it to do something.

[mikinoz]

Mine didn't open the boot originally either, seem that with some functions on the MFD you have to untick it and tick it again for it to do something.

I only have half height mfd, so I will have to do it via VCDS?

[G-rig]

I only have half height mfd, so I will have to do it via VCDS?

Assume so if there isn't a setting for it, not familiar with what functions are standard on half height sorry.

[G-rig]

It also depends on the year of the car as he may have a diversity box under the drivers seat.

And he may be able to use the connector plug rather than the more expensive adapter

[mikinoz]

What is the max SD card size for these units? 32GB?

[mikinoz]

Ours were a steal compared to these!

http://www.mfd3.com/store/sale-items/oem-rns-510-navigation-package-sale-pricing-thru-531/

[G-rig]

Anything under 2k is good for an RNS510. I'd expect refirbished / 2nd hand would be cheaper.

The firmware from 2660 onwards enabled 32Gb iirc.

[Ankush]

Thanks John for all the help. The car was in for some warranty repairs yesterday an they installed maps ver3 too.

The unit works brilliantly can't be happier.

[mikinoz]

http://www.illektronik.com/vwgolf/gpsplacement.jpg

Dude, you did the LHD mod, I love it!

[Pharkus]

Dude, you did the LHD mod, I love it!

I see what you did there. BTW thanks John for posting this up.

[mikinoz]

Last night I might add I did a one hour coding session. I feel like a gun at the VCDS now.

Only last thing I need is to have the doors unlock when the key is removed. It is selected, but not working... :/

[WingnutR32]

Haha, i had to stare at that photo for a bit to work out what was 'fixed'.... I see whats going on now :D

[Pharkus]

That Russian tacho mod gives you heaps maximum RPM's at standstill!

[YouSnooze]

My RNS arrived today. The box was quite a bit larger than the unit so it has moved around a bit in transit [despite the padding]. One of the 4 'anchor' holes/plate is quite bent so I hope it works. Unit itself looks OK apart from the bent metal corner & lots of dirty finger prints all over the metal chassis :<. Now I have all my other things like antenna adapter, MDI, CANBUS etc I just have to slot it in & cross my fingers :eek:.

[G-rig]

After the photo I'd try bending it back carefully and u should be sweet.

Mine was well bubble wrapped from Tommy but one tab was a bit bent too.

[mikinoz]

So I took the protection layer off today and have a slightly marked screen, nothing that would not happen if it were in the car for 6 months, but not pristine either.

I'm cool with the discount over RRP for such a small inconvenience.

[G-rig]

So I took the protection layer off today and have a slightly marked screen, nothing that would not happen if it were in the car for 6 months, but not pristine either.

I'm cool with the discount over RRP for such a small inconvenience.

Yeah you guys got them very cheap and they aren't new.
However i thought refurbished was mostly replacing the screens with new ones etc?

Could be worth getting some of those protective Clarivue covers (details on Mav's site).

Worst case you can always get replacement screens from ebay and places but I wouldn't bother if it's not bad.

I actually like the screen protectors as they make the colours a bit more vibrant and the glare isn't too bad (hopefully stephen left it on as it took ages to get it perfect).

[mikinoz]

I'll give it a bit of attention over thevweekend and see if improves.

As I said though hardly a deal breaker.

[SUGA]

My RNS arrived today. The box was quite a bit larger than the unit so it has moved around a bit in transit [despite the padding]. One of the 4 'anchor' holes/plate is quite bent so I hope it works. Unit itself looks OK apart from the bent metal corner & lots of dirty finger prints all over the metal chassis :<.

Got mine yesterday! Same story as YouSnooze, most of the tabs are bent on mine but only slightly, nothing that I'm too worried about. Thanks again John for organising this!

Now to read the DIY threads or get 10d to come around to plug this thing in :P

[mikinoz]

Could be worth getting some of those protective Clarivue covers (details on Mav's site).


Nice tip. GB anyone?

[Paolo]

Nice tip. GB anyone?

^ word, i'm down

[WingnutR32]

I'd be keen on a protective coating.. Don't really have grubby hands or anything like that, but easier cleaning and protection is always a plus.

[mikinoz]

Issue 1

Package Includes:
- 2 x custom-cut Clarivue screen protector
- Both width and height must be 95mm or less
*
Our screens are bigger than this.

I'll do more research later on.

[WingnutR32]

The Pre-Cut sizes should allow for a larger piece, but you will only get 1 protector, not 2.

Edit:
78x144mm (as recommended by Maverick on my-gti.com) is $19.99USD for 1pc only.

[G-rig]

http://www.my-gti.com/995/protecting-the-touch-screen-on-the-rns-310-rcd-510-and-rns-510-headunits

I measured the backing size on the protector i got and the actual (delivered size is 76 x 142mm).


The screen size (visible) is 79 x 145. The order size is 78 x 144 and the delivered size is 76 x 142. It clearly states on the order page that they remove 2mm from your supplied screen size. If you ordered one that was the same size as the screen how would you remove it without having to use a knife or similar to lift it from the screen? You have to leave a border around the outside to allow positioning of the protector and easy removal. Your finger cannot touch that area that is exposed around the outside (1.5mm all around) and there are no problems with leaving this gap visible as the purpose is to protect against wear and tear along with accidental scratches.

[mikinoz]

Someone arrange the GB, I did the CANBUS one and am exhausted by this space age film research. :P

[murky]

Just an update on the whole install thing:

Managed to install maps successfully. But missing the centre console integration.

Soooo, got hold of a Micro-CAN dongle and sourced some info from this (http://vwnavi.com/showthread.php/13574-DIY-install-rcd-510-to-RNS-510-on-2010-CC) page.

In VCDS:

Start in module 19 Can Gateway. Using the long coding helper, activate 57-Navigation. Next deactivate 1C position sensing. After your coding changes, clear all fault codes.

Next, go to 57-Navigation. You will need to setup BAP and activate Dynaudio if you have it. Check the Aux/In box if you have MDI. Before you click "Do It!" make sure the workshop code and import code are something other than zeros. Clear all fault codes.

Finally, go to 56-Radio and clear any fault codes.

Power on the RNS and push the < and > buttons together with the small button on the top right of the unit. Release the buttons and the unit should reboot. You always need to reboot the RNS after coding changes.

Run another autoscan. You should not have any error codes left. Let me know if you do and I can try to trouble-shoot it with you.
That all made sense except for the 1C position sensing (don't think I had that); BAP was enabled; No dynaudio, and couldn't work out the workshop/import codes. Oh yes, and I couldn't clear the fault codes.
At this stage I rebooted, and went for a drive around the suburb - and lo, I had navigation in front of me!

So, I shall try another scan tomorrow and see if I can clear all the residual errors.

I now realise that disconnecting the battery would have been a great idea before swapping the units over. We live and learn...

[Pharkus]

In for protective covers, let me know pricing and details.

[simonr]

So my RNS510 arrived on Thursday morning, and i picked my GTI up on Thursday night.. trying to get the dealer to put in the unit for me.. but if that doesn't end up working out.. Can someone please advise me on two thinks before i go and try and put it in myself..

1. There are only 4 screws holding it in place? these are torx screws? any idea which size? as i will have to see if i have torx bits around..
2. What do you have to do to install the maps? just put the cd in??

[WingnutR32]

Just looking at Clarivue's special says any orders over 3 get 10% off. Should we start another thread for who is interested?

I can try and organise something but I'll be travelling from site to site over the next 2 weeks, so will have very very little time to scratch myself.

[G-rig]

the clarivue iPhone covers are very good too, I've converted over from bestskinsever as they were too soft and not slippery enough (but still have one on the back).

[murky]

1. There are only 4 screws holding it in place? these are torx screws? any idea which size? as i will have to see if i have torx bits around..
2. What do you have to do to install the maps? just put the cd in??

See an earlier post by yourself - it contains some good links on how to install.
I have managed to do it all without much drama (remember to disconnect -ve terminal on battery or you will get VCDS errors - however, it seems to survive if you don't).

To answer your question: you need a butterknife or a trim removal tool (but I used my fingernails to good effect) - some people have reported that this is very fragile, and a T20 torx bit for the 4 exposed screws. After that, you will need to yank really firmly on the air-vent component above in order to place the GPS antenna.
Installing the maps is as simple as putting the disc in, and (I think) going to the navigation area. I didn't get much feedback from the display to say it was done - it just started working after a while.

HTH.

[SUGA]

Tendy came around this morning and helped to install my unit. Easy process and there were no issues with bending the tabs back.
I'm super happy with it although I do have a dead pixel!
http://farm5.static.flickr.com/4019/4655208976_a9d61e5fc9_b.jpg

Now to install the firmware, I've downloaded the files and burnt them to DVD but can't seem to install it?
HELP!

[Pharkus]

Tendy came around this morning and helped to install my unit. Easy process and there were no issues with bending the tabs back.
I'm super happy with it although I do have a dead pixel!
http://farm5.static.flickr.com/4019/4655208976_a9d61e5fc9_b.jpg

Now to install the firmware, I've downloaded the files and burnt them to DVD but can't seem to install it?
HELP!

I need a Tendy down in Melbourne! You are a handy man to have around.

Shame about the pixel, have you tried massaging it or anything Christina? Pity it's an always on one.

[G-rig]

Tendy came around this morning and helped to install my unit. Easy process and there were no issues with bending the tabs back.
I'm super happy with it although I do have a dead pixel!

I assume they would send you out another unit covered under the 1 year warranty?


Now to install the firmware, I've downloaded the files and burnt them to DVD but can't seem to install it?
HELP!

What firmware do you have now? It may not do anything if you have the latest already?

I assume you got it from Mav's site, you may have to try different burning speeds and media perhaps. Nero can be crap but mine worked using IMGBurn (free program which is much better - could be worth a go).

[SUGA]

I assume you got it from Mav's site, you may have to try different burning speeds and media perhaps. Nero can be crap but mine worked using IMGBurn (free program which is much better - could be worth a go).

Yeh from Mav's site, I'll try again with a different speed! Thanks G


I have just sent Tadas an email with some feedback regarding bent tabs and the packaging issues quite a few of you have had. I have also asked what we can do about your screen. We might be able to get a replacement screen sent or work out a replacement of some kind. Will let you know what I find out Christina. I also queried mikinoz's scratched screen. If we end up getting a replacement screen, we might be able to arrange 2 and have yours fixed. This is what I proposed, so we'll see what happens when he responds.

Will give you an update as soon as I can.

J

Thanks John, keep us posted!

[G-rig]

just try 4X or something like that!

[murky]

Having trouble getting the firmware to be recognised too.
Using Toast on a Mac - doesn't seem to want to burn on DVD - just CD.
Tried at 4x and is rejected by unit.

Anyone had any luck with the firmware from http://www.my-gti.com/2291/volkswagen-rns-510-firmware-upgrade-to-version-2760-2762-2764-2766-2768?

[SUGA]

I burnt onto DVD on my mac the first time and didn't work, then I tried burning from Justin's PC at 4X and the unit spat it out straight away. Hmm what am I doing wrong? :(

[G-rig]

You're using a mac to start with (just kidding).

I think he said to use DVD +R check the instructions but shouldn't be that hard you'd think.

[Pharkus]

Quickie. Unit is in and my contact Chad has once again done an awesome job (PM me if you want contact details down in Melbourn - also let me know if this is ok as he is not a sponsor). After shutting down and locking the car up, there is a fan at the back that continues to run. Is this normal? I would imagine it should turn itself off in a bit but wasn't sure. Thanks

[G-rig]

That's normal John. Should turn off after about 20 mins.

[Pharkus]

Thanks Greg.

Cool, now to figure out whether stupid iTunes will actually burn a playlist without dumping each song into a different folder...FFFFFFUUUUUUU APPLE.

Don't say I have to do this manually, that would suck.

[stephen8512]

just letting you know, any songs in .m4a format will not read on the RNS unit

[Pharkus]

That's normal John. Should turn off after about 20 mins.

Haven't really checked back on this since Greg, not that there's a way unless I want to sit in the car for 20 mins to test. Seems the fan comes on (or has remained on) whenever I go open the car. Guess I will find out this weekend then if my battery is flat.

[G-rig]

What year is your car? Half height MFD? not sure if you needed the can upgrade or not but assume you already looked into that?

The unit powers up as soon as you unlock the car with the keyfob.

You could try turning off the interior sensor (button on the drivers door pillar) and locking the car and sitting in there for <20mins..

[Pharkus]

I checked it all out before concluding that I didn't need an updated CANBUS. My car has the highline MFD so I presumed it would be ok, it was one of the later MY2007 builds (I think).

@John - It's just my delicate ears and hearing a new noise in the cabin after I turned the car off is all. Better to ask stupid questions on here I guess than feel sorry later.

BTW for you all wanting Clarivue screen protectors. I just ordered 4 (2 Anti glare, 2 Clear vision), as I like some spares. There is free shipping at the moment so if you want spares for yourself or know others in the same state, it's probably better ordering yourselves.

Also enter in clarivue7 as a promotional code for an additional 10% off. So order of 3+ and coupon code nets you a 20% discount.

[dopey]

So anyway, at the time of this group buy I didn't think I would need any audio upgrades anytime soon since I just put the RCD510 into the silver car. Now with my white one on the way, I'm thinking about spending the extra bucks on a RNS-510 instead of another RCD-510 - do you think they will be available at these good group buy prices again anytime soon?

[mikinoz]

Anyone worked out how to change the DVD region code?

[G-rig]

Anyone worked out how to change the DVD region code?

You can do it in VCDS. You can't make it region free, but have to select one (ie Zone 4).

http://www.my-gti.com/88/changing-region-code-on-the-rns510

[mikinoz]

Lol, I changed mine to 0 if I recall correctly.

Thanks.

[mikinoz]

Hey John, your in box is full, again! ;)

pm me your mobile number if you can. Ta.

[WingnutR32]

Just a quick one guys. What is the current firmware on our RNS 510s and do they need updating? Heading to see Derek tomoz for everything to be installed and wasn't sure if I should bring a disc with a firmware update on it.

[murky]

Just a quick one guys. What is the current firmware on our RNS 510s and do they need updating? Heading to see Derek tomoz for everything to be installed and wasn't sure if I should bring a disc with a firmware update on it.
Mine was on 2720 I think. The latest (2760) is a bugfix release, which the general consensus seems to be, if it ain't broke, don't upgrade to it.
See here (http://www.my-gti.com/2291/volkswagen-rns-510-firmware-upgrade-to-version-2760-2762-2764-2766-2768) for more info.

I did read somewhere that there is a v2800 firmware imminent - could just be an unsubstantiated rumour though.

[WingnutR32]

Cheers for that murky. At least it is later than 2660.