Volkswagen Golf MKIVolkswagen Golf MKIIVolkswagen Golf MKIIIVolkswagen Golf MKIVVolkswagen Golf MKVVolkswagen Golf MKVIVolkswagen Golf MKVII


+ Reply to Thread
Results 1 to 2 of 2

Thread: Front end camber

  1. #1
    Member
    Join Date
    Jun 2013
    Location
    victoria
    Daily
    2012 golf r
    2nd Car
    vw polo 1.9 tdi
    Name
    rod
    Posts
    33

    Front end camber

    Mk 6 Golf R wearing both front Tyers out on inside bad. Bob Jane said it cant be Adjusted Any thoughts please
    Cheers Rod

  2. #2
    Junior Member
    Join Date
    Nov 2014
    Location
    Sydney
    Daily
    Mk6 Golf R
    Posts
    23

    There is some limited camber adjustment in the mounts. Loosen the bolts on the strut top and pull outwards and retighten. There's maybe 0.1-0.2 degrees in it. If it's wearing badly that may not be enough to adjust the problem out. Stock camber is 0.75 degrees +/- 0.5 degrees and that increases as you lower the car so if you're lowered that might be contributing. You can look at Superpro camber adjustable ball joints or camber plates from various places for greater and easier adjustment.

    Michael
    2012 Golf R - 6 Speed Manual, ACC, 19" Talledegas, Dynaudio, Sat Nav, Reversing Camera, Sunroof
    Mods - Recode Tune, Ultimate Racing resonated DP, Milltek non-resonated Catback, 145bar FPV, Carbonio, Modified Airbox, KW DDC Plug & Play, Whiteline ALK, Spulen Short Shift, De-restricted Clutch Bleeder

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts