[How To] Upgrade your RNS510 Rev (A,B,C) to Firmware 3810 and VW V5 Maps

[ozmale]

Looking for v5 maps.. have trawled through all of this thread..

Try this, god knows how lonk it will work for.

http://www.4shared.com/zip/0R22LPra/...av_AUS_NZ.html

Chris

[Spydar]

What's with the new maps saying 120km/h in 100 or 110 zones?

Is this a valid excuse if I am caught speeding?

[dizzy_7]

Sorry to bring an old thread back to life.

I installed V5 maps on firmware 2760, then last night I upgraded firmware from 2760 to 3810 filename was 3810a_noru.rar

The firmware went through fine i have revision (C - RNS510)

Now though i cannot load maps again, i asks for the maps DVD for the GPS to work and does not copy over.

When i was running firmaware 2760 it copied over fine, upgraded maps disappeared and now cannot copy to HDD, must use DVD at all times.

Can anyone help?

[Steve]

do you have an older version of the maps? If so...install that (it will o'write the current map). After the nold version has installed, then install your version 5 map. It SHOULD take.

Report back (may have other help for you if this doesn't work)

Dizzy...you have a PM...it contains info which may help

[M4RK0]

do you have an older version of the maps? If so...install that (it will o'write the current map). After the nold version has installed, then install your version 5 map. It SHOULD take.

This ^ with every Firmware upgrade the maps will have to be reloaded,

Please let us know....

[dizzy_7]

I have the original disc for V3 maps and even those ask me to insert DVD and WILL not copy over to the HDD.

HELP!!

[Steve]

did you do a soft re-boot of the RNS after the FW upgrade?

[dizzy_7]

yeah after the firmware upgrade it automatically reboots?

I might try re loading the firmaware then maps, start from scratch

[M4RK0]

did you do a soft re-boot of the RNS after the FW upgrade?

Sometimes you have to do it again, after you have done the RNS reboot,

You can download the V5 Maps from here,

RNS-510-V5-Australia-New-Zealand-maps

This should work,

[Steve]

Sometimes you have to do it again, after you have done the RNS reboot,

You can download the V5 Maps from here,

RNS-510-V5-Australia-New-Zealand-maps

This should work,

I sent him a link to my dropbox for the V5.1 map.

If all else fails..I have the formatting .iso to give him so that he can make a fresh start